[rbak-nsp] SVLAN configuration

[Larry Jones]

Here's an example with PPPoE encapsulation SVLAN=99, CE VLANs=2 to 4095

port eth x/x
dot1q pvc 99 encapsulation 1qtunnel
  dot1q pvc on-demand 99:2 through 4095 encapsulation pppoe
   bind authentication pap chap maximum 8000

+++++++++++++++++++
Larry Jones

From: redback-nsp-bounces at puck.nether.net [mailto:redback-nsp-bounces at puck.nether.net] On Behalf Of Richard Clayton
Sent: Saturday, November 27, 2010 11:45 AM
To: redback-nsp at puck.nether.net
Subject: [rbak-nsp] SVLAN configuration

Does anybody have a sample configuration of how to configure an Ethernet SVLAN Q in Q

Scenario

1Gb Ethernet bearer from BT Wholesale connected directly into redback, customer CE has two vlans but I think BT only present one down the bearer.  If this is the case the CE vlans on the redback would need to be Q in Q, does anybody have any experience of this.

Thanks
Rick

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20101127/3f6c615b/attachment.html>