[rbak-nsp] xcrp doesnt activated

[mr.anatoly at gmail.com]

Marcin, craft port is placed on the XCRP card. No any outputs to the
console, cause XCRP no operate.

On Fri, 08 Oct 2010 09:45:14 +0200
Marcin Kuczera <marcin at leon.pl> wrote:

> mr.anatoly at gmail.com wrote:
> > Hello,
> > 
> > SE400.
> > There is some problem - XCRP-card doesnt activated. All LEDs on
> > board are off. DC input is present, PWR_A LED on alarm card is
> > green and fan tray operates. What way of the troubleshoot such
> > problems?
> 
> first of all, connect serial cable and dump the output from the
> console right after powering up the card
> 
> Marcin



--
/Anatoly