[rbak-nsp] xcrp doesnt activated

[Marcin Kuczera]

mr.anatoly at gmail.com wrote:
> 
> Marcin, craft port is placed on the XCRP card. No any outputs to the
> console, cause XCRP no operate.
> 

Well, the you shoud contact the support.

Marcin



> On Fri, 08 Oct 2010 09:45:14 +0200
> Marcin Kuczera <marcin at leon.pl> wrote:
> 
>> mr.anatoly at gmail.com wrote:
>>> Hello,
>>>
>>> SE400.
>>> There is some problem - XCRP-card doesnt activated. All LEDs on
>>> board are off. DC input is present, PWR_A LED on alarm card is
>>> green and fan tray operates. What way of the troubleshoot such
>>> problems?
>> first of all, connect serial cable and dump the output from the
>> console right after powering up the card
>>
>> Marcin
> 
> 
> 
> --
> /Anatoly
> 
>