[rbak-nsp] xcrp doesnt activated

[Łukasz Adamczyk]

It's a common problem, every third reload I have the same with standby card. Reload the box or remove and insert your card again.
Dnia 8 października 2010 10:43 mr.anatoly at gmail.com napisał(a):
Marcin, craft port is placed on the XCRP card. No any outputs to the
console, cause XCRP no operate.
On Fri, 08 Oct 2010 09:45:14 +0200
Marcin Kuczera <marcin at leon.pl> wrote:
> mr.anatoly at gmail.com wrote:
> > Hello,
> > 
> > SE400.
> > There is some problem - XCRP-card doesnt activated. All LEDs on
> > board are off. DC input is present, PWR_A LED on alarm card is
> > green and fan tray operates. What way of the troubleshoot such
> > problems?
> 
> first of all, connect serial cable and dump the output from the
> console right after powering up the card
> 
> Marcin
--
/Anatoly
_______________________________________________
redback-nsp mailing list
redback-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/redback-nsp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20101011/fcb1ecd8/attachment.html>