[rbak-nsp] Corrent subscriber's configuration but cannot ping gateway

fatih ayvaz fayvaz77 at yahoo.com
Tue Apr 26 07:39:55 EDT 2011


hi Tao,

did you check whether your binding is ok with "show bindings" command?
did you configure a multibind interface for such subscriber(s)?
did you see packets coming in/out on the subscriber circuit?

regards.
Fatih

--- On Thu, 4/21/11, Tao Lei <taolei at gwbn.net.cn> wrote:

From: Tao Lei <taolei at gwbn.net.cn>
Subject: [rbak-nsp] Corrent subscriber's configuration but cannot ping gateway
To: redback-nsp at puck.nether.net
Date: Thursday, April 21, 2011, 3:19 PM

Hello.

I have run into this strange thing more than once, especially when configuring or modifying dedicated IP for customers:
 The configuration is correct -- "interface", "subscriber", "bind subscriber" ... all are there, no wrong.
 But the customer is still not able to ping the gateway (interface's ip address configured on BRAS).
 Finally, I undo the "bind subscriber"statement and then re-bind it, or even delete the subscriber and then re-create it.
 Not till then can the customer ping gateway.

I don't know where the problem is and why sometimes I must first un-bind and then re-bind the subscriber.
Is there any detail need to be paid attention to?

Thanks. 
_______________________________________________
redback-nsp mailing list
redback-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/redback-nsp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20110426/6126b083/attachment.html>


More information about the redback-nsp mailing list