[rbak-nsp] li-admin from Cisco ACS

[Tomas Lynch]

Faith,

Thanks for your answer, I knew that that was the command line, my question
is where in the Cisco ACS must be configured. Do you know where? The only
similar config that I have found is http://bit.ly/dHdxuC

Shall I put that line in step 3 like the allow-commands example?

Thanks,

Tomas

On Thu, Feb 3, 2011 at 12:26 PM, fatih ayvaz <fayvaz77 at yahoo.com> wrote:

> Hi Tomas,
>
> you need to have:
> optional command-access = LI-admin
>
> in tacacs config, to return your tacacs authenticated user with LI-admin
> privileges.
> In addition, you need to have li license installed on the BRAS.
>
> Regards.
> Fatih
>
> --- On *Thu, 2/3/11, Tomas Lynch <tomas.lynch at gmail.com>* wrote:
>
>
> From: Tomas Lynch <tomas.lynch at gmail.com>
> Subject: [rbak-nsp] li-admin from Cisco ACS
> To: redback-nsp at puck.nether.net
> Date: Thursday, February 3, 2011, 3:51 PM
>
>
> We need to send the li-admin permission to a SE1200 from a Cisco ACS
> (TACACS+ for windows) but cannot find any info or example. Anybody on this
> list?
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net<http://us.mc1120.mail.yahoo.com/mc/compose?to=redback-nsp@puck.nether.net>
> https://puck.nether.net/mailman/listinfo/redback-nsp
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20110203/de76a52f/attachment.html>