[rbak-nsp] PPP timeoute

[David Freedman]

It is a per-context command:

³ ppp keepalive check-interval minutes <x> response-timeout <y>²

Though, if your tunnel bounces, the user is likely to get disconnected
anyway..



On 12/01/2011 11:52, "Richard Clayton" <sledge121 at gmail.com> wrote:

> Does anybody know the default PPP timeout and the command to adjust it., I
> have 2 Ethernet circuits carrying PPP over L2TP, the circuits are configured
> as active / standby using BGP metrics, the BGP hold time is 30 seconds and I
> was wondering if the ppp users would disconnect before BGP flipped the routing
> over to the other circuit.
>  
> Thanks
> Rick
> 
> 
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp

--

David Freedman
Group Network Engineering

david.freedman at uk.clara.net
Tel +44 (0) 20 7685 8000

Claranet Group
21 Southampton Row
London - WC1B 5HA - UK
http://www.claranet.com

Company Registration: 3152737 - Place of registration: England

All the information contained within this electronic message from Claranet
Ltd is covered by the disclaimer at http://www.claranet.co.uk/disclaimer


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20110112/f1f5b959/attachment.html>