[rbak-nsp] PPP timeoute

[Marcin Kuczera]

Richard Clayton wrote:
> Does anybody know the default PPP timeout and the command to adjust it., 
> I have 2 Ethernet circuits carrying PPP over L2TP, the circuits are 
> configured as active / standby using BGP metrics, the BGP hold time is 
> 30 seconds and I was wondering if the ppp users would disconnect before 
> BGP flipped the routing over to the other circuit.

  ppp keepalive check-interval seconds 10

be carefull about XCRP load.

Regards,
Marcin