[rbak-nsp] SE600 cold start and a few questions

[Denis Mikhaylovskiy]

Hi Marcin,

As per questions

1. Each power connection must be able to supply a minimum of 75 amperes.
2. With XC4 we do not have any default slots.
3. If you have two XC4 then after power on the active XC is the one who
complete boot procedure first. So we do not force XC to be active in some
specific slot.

4. Normal.


On 2/1/11 12:01 AM, "Marcin Kuczera" <marcin at leon.pl> wrote:

>Hello,
>
>first startup of new SE600 and I have a few questions:
>
>1. Power supply cables - what diameters are normally connected there ?
>Original connector are for 35mm2 cables (have no Idea about AWG) -
>cables for about 120A like for electric chair... Max for this device is
>62-63A so 10mm2 cables should be absolutly enough..
>The only explanation for me is that this is the same connector as for
>SE1200
>
>2. default slot for XCRP4 processor - 7 or 8 ?
>We have just one and alarms sais:
>Jan 31 22:48:58 xcrp4-base        7              Major     Backup fail:
>peer dead
>Jan 31 22:48:58 xcrp4-base        8              Critical  Controller
>missing
>Jan 31 22:49:08 xcrp4-base        8              Major     Controller
>auto switch completed
>
>
>seems like slot 8 is default master while slot 7 is default backup.
>
>
>3. How to switch SEOS into single XCRP mode ? Does it make any sense ?
>
>4. Alarm card POD fail ???
>Jan 31 22:48:58 chassis                          Minor     Alarm card
>power-on diagnostic failed
>
>Strange or normal at cold start ?
>
>Regards,
>Marcin
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>[local]SE600-GZE#show system alarm all
>Timestamp       Type              Source         Severity  Description
>--------------------------------------------------------------------------
>-
>Jan 31 22:49:07 chassis                          Minor     Chassis power
>failure
>  - side B
>Jan 31 22:48:58 chassis                          Minor     Alarm card
>power-on diagnostic failed
>Jan 31 22:55:52 10ge-4-port       1/1            Major     Link down
>Jan 31 22:55:52 10ge-4-port       1/2            Major     Link down
>Jan 31 22:48:58 xcrp4-base        7              Major     Backup fail:
>peer dead
>Jan 31 22:48:58 xcrp4-base        8              Critical  Controller
>missing
>Jan 31 22:49:08 xcrp4-base        8              Major     Controller
>auto switch completed
>
>[local]SE600-GZE#
>
>
>_______________________________________________
>redback-nsp mailing list
>redback-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/redback-nsp