[rbak-nsp] binding pppoe to a link group

[Michael J. Gage]

link-group [name] access
encapsulation dot1q
dot1q pvc [id] encapsulation multi
  bind interface [name] [context]
  circuit protocol pppoe
   bind authentication pap context [context] maximum [count]

Just a possible configuration...

From: redback-nsp-bounces at puck.nether.net [mailto:redback-nsp-bounces at puck.nether.net] On Behalf Of Jeff Crowe
Sent: Wednesday, July 13, 2011 3:07 PM
To: 'Larry Jones'; redback-nsp at puck.nether.net
Subject: Re: [rbak-nsp] binding pppoe to a link group

Hi Larry,

Thanks for the quick reply - unfortunately the link-group name access configuration doesn't give me access to dot1q pvc commands.

I am wondering if it is the ancient version of seos I am running - 5.0.7.10 (going to duck for cover now)


Jeff

From: Larry Jones [mailto:ljones at mta-telco.com]
Sent: Wednesday, July 13, 2011 4:50 PM
To: Jeff Crowe; redback-nsp at puck.nether.net
Subject: Re: [rbak-nsp] binding pppoe to a link group

The link-group has to be an access link-group

Sent from my HTC
----- Reply message -----
From: "Jeff Crowe" <jeff at wtccommunications.ca<mailto:jeff at wtccommunications.ca>>
Date: Wed, Jul 13, 2011 12:43 pm
Subject: [rbak-nsp] binding pppoe to a link group
To: "redback-nsp at puck.nether.net<mailto:redback-nsp at puck.nether.net>" <redback-nsp at puck.nether.net<mailto:redback-nsp at puck.nether.net>>
Hi all,

We have a 12 port Ethernet card in our system.  I am trying to create a link-group using ports 1-4 that will support incoming pppoe connections.

Currently my port configuration is:

port ethernet 1/3
description PPPoE
medium speed 100 duplex full
no shutdown
encapsulation dot1q
dot1q pvc 401 encapsulation pppoe
  bind authentication pap chap context somecontext maximum 4000
dot1q pvc 402 encapsulation pppoe
  bind authentication pap chap context somecontext maximum 4000
...



What I would like to do is add the dot1q pvc 402 encapsulation pppoe and bind authentication pap chap context somecontext maximum 4000 to a link-group incoming-pppoe dot1q configuration, but there is no dot1q pvc ### encapsulation option available.

So, my question is: how do I bind pvc's inside of link-groups to have the encapsulation of pppoe?

Thanks,

Jeff

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20110713/e6756775/attachment.html>