[rbak-nsp] binding pppoe to a link group

[Navin Nepali]

this is the configuration I am using:
 
link-group <linkname> access
 encapsulation dot1q
 qos hierarchical mode strict
 dot1q pvc 2 encapsulation pppoe 
  bind authentication pap context <name> maximum 1000

From: Jeff Crowe <jeff at wtccommunications.ca>
To: "redback-nsp at puck.nether.net" <redback-nsp at puck.nether.net>
Sent: Thursday, July 14, 2011 1:53 AM
Subject: [rbak-nsp] binding pppoe to a link group


Hi all,
 
We have a 12 port Ethernet card in our system.  I am trying to create a link-group using ports 1-4 that will support incoming pppoe connections.
 
Currently my port configuration is:
 
port ethernet 1/3
description PPPoE
medium speed 100 duplex full
no shutdown
encapsulation dot1q
dot1q pvc 401 encapsulation pppoe
  bind authentication pap chap context somecontext maximum 4000
dot1q pvc 402 encapsulation pppoe
  bind authentication pap chap context somecontext maximum 4000
…
 
 
 
What I would like to do is add the dot1q pvc 402 encapsulation pppoe and bind authentication pap chap context somecontext maximum 4000 to a link-group incoming-pppoe dot1q configuration, but there is no dot1q pvc ### encapsulation option available.
 
So, my question is: how do I bind pvc’s inside of link-groups to have the encapsulation of pppoe?
 
Thanks,
 
Jeff
 
_______________________________________________
redback-nsp mailing list
redback-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/redback-nsp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20110714/f0143f65/attachment.html>