[rbak-nsp] understand PPPoE connection ion SE800

[Nono J]

Hi Larry

Yes, the IP is public and reachable throuhg Internet, and visible with 
whatismyip.com

James

Le 23/07/2011 22:41, Larry Jones a écrit :
> What IP address does the PC show when connected?
> And what IP address  does the world see? (ex: whatismyip.com)
>
> +++++++++++++++++++
> Larry Jones, CCNA
> Matanuska Telephone Association, Inc.
> Network Engineer
> (907) 761-2785 desk
> (907) 863-5001 cell
> ljones at mta-telco.com
>
> -----Original Message-----
> From: redback-nsp-bounces at puck.nether.net [mailto:redback-nsp-bounces at puck.nether.net] On Behalf Of Nono J
> Sent: Saturday, July 23, 2011 2:58 AM
> To: redback-nsp at puck.nether.net
> Subject: [rbak-nsp] understand PPPoE connection ion SE800
>
> Hello
>
> I have a bizzar network configuration on my PC using PPPoE with a SE800.
> I configured the Radius to send on access-accept
> famed-ip-address=255.255.255.254. but on PC PPPoE session, the GW (shown
> on ipconfig) is 0.0.0.0 with a netmask 255.255.255.255. But even this
> curious GW, the PPPoE session work well, and the PC can find its good GW
> on SE800.
>
> IP:<IP address provided by BRAS>
> netmask: 255.255.255.255
> GW: 0.0.0.0
>
> any idea on uderstanding, and perhaps  changing to classical example as
> following ?
> IP:<IP address provided by BRAS>
> netmask: 255.255.255.255
> GW:<IP address provided by BRAS>
>
> Thanks
>
> James
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp
>
>
>