[rbak-nsp] understand PPPoE connection ion SE800

[Larry Jones]

What IP address does the PC show when connected?
And what IP address  does the world see? (ex: whatismyip.com)

+++++++++++++++++++
Larry Jones, CCNA
Matanuska Telephone Association, Inc.
Network Engineer
(907) 761-2785 desk
(907) 863-5001 cell
ljones at mta-telco.com

-----Original Message-----
From: redback-nsp-bounces at puck.nether.net [mailto:redback-nsp-bounces at puck.nether.net] On Behalf Of Nono J
Sent: Saturday, July 23, 2011 2:58 AM
To: redback-nsp at puck.nether.net
Subject: [rbak-nsp] understand PPPoE connection ion SE800

Hello

I have a bizzar network configuration on my PC using PPPoE with a SE800.
I configured the Radius to send on access-accept 
famed-ip-address=255.255.255.254. but on PC PPPoE session, the GW (shown 
on ipconfig) is 0.0.0.0 with a netmask 255.255.255.255. But even this 
curious GW, the PPPoE session work well, and the PC can find its good GW 
on SE800.

IP: <IP address provided by BRAS>
netmask: 255.255.255.255
GW: 0.0.0.0

any idea on uderstanding, and perhaps  changing to classical example as 
following ?
IP: <IP address provided by BRAS>
netmask: 255.255.255.255
GW: <IP address provided by BRAS>

Thanks

James
_______________________________________________
redback-nsp mailing list
redback-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/redback-nsp