[rbak-nsp] FPGA version Mismatch

[Larry Jones]

Do a 'show hardware detail' or 'show hardware card 5 detail'
The left numbers should match the right. If not do a 'reload fpga x' x = card number

HubFpga rev         : 0x53              HubFpga file rev    : 0x53
SpiFpga rev         : 0x13              SpiFpga file rev    : 0x13


Ex:

show hardware card 5 detail

Slot                : 5                 Type                : ge-10-port
Serial No           :                   Hardware Rev        : 64
EEPROM id/ver       : 0x5a/4            Mfg Date            : 22-OCT-2008
HubFpga rev         : 0x53              HubFpga file rev    : 0x53
SpiFpga rev         : 0x13              SpiFpga file rev    : 0x13
IPPA memory         : 1024 MB           EPPA memory         : 1024 MB
Voltage 1.500V      : 1.513 (+1%)       Voltage 1.800V      : 1.813 (+1%)
Voltage 2.500V      : 2.469 (-1%)       Voltage 3.300V      : 3.304 (+0%)
Temperature         : NORMAL (51 C)
Card Status         : HW initialized    POD Status          : Success
ODD Status          : Not Available
Fail LED            : Off               Active LED          : On
Standby LED         : Invalid
Chass Entitlement   : All (0x0)
Ports Entitled      : All
Active Alarms       : NONE





From: redback-nsp-bounces at puck.nether.net [mailto:redback-nsp-bounces at puck.nether.net] On Behalf Of Navin Nepali
Sent: Saturday, June 25, 2011 9:26 AM
To: redback-nsp at puck.nether.net
Subject: [rbak-nsp] FPGA version Mismatch

I am quite unclear. When my se800 bootup, in the post message i can see the following mismatch:

Jun 25 21:43:28 Redback csm: FPGA mismatch detected on card ge3-4-port in slot 5
Jun 25 21:43:36 Redback csm: FPGA mismatch detected on card ge3-4-port in slot 6

However, when i check " show chassis", i don't see FPGA mismatch issue in these cards.

Do i still need to upgrade the FPGA version?

Thanks




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20110625/371a4982/attachment-0001.html>