[rbak-nsp] FPGA version Mismatch

[Navin Nepali]

I found like this. I guess i need to upgrade the "HubFpga rev".  When I do ‘reload fpga x’, it will reload the card, right? 
Anyway, what's the consequences if we don't upgrade the FPGA version?
 
 
[local]NT-SE800#show hardware card 5 detail 
Slot                : 5                 Type                : ge3-4-port       
Serial No           : A620D250720352    Hardware Rev        : 20               
EEPROM id/ver       : 0x5a/4            Mfg Date            : 23-JUN-2007      
HubFpga rev         : 0x9               HubFpga file rev    : 0xa              
SpiFpga rev         : 0xa               SpiFpga file rev    : 0xa    


From: Larry Jones <ljones at mta-telco.com>
To: 'Navin Nepali' <navin_n at yahoo.com>; "redback-nsp at puck.nether.net" <redback-nsp at puck.nether.net>
Sent: Sunday, June 26, 2011 1:53 AM
Subject: RE: [rbak-nsp] FPGA version Mismatch


 
Do a ‘show hardware detail’ or ‘show hardware card 5 detail’ 
The left numbers should match the right. If not do a ‘reload fpga x’ x = card number 
  
HubFpga rev         : 0x53              HubFpga file rev    : 0x53              
SpiFpga rev         : 0x13              SpiFpga file rev    : 0x13              
  
  
Ex: 
  
show hardware card 5 detail 
  
Slot                : 5                 Type                : ge-10-port        
Serial No           :                   Hardware Rev        : 64                
EEPROM id/ver       : 0x5a/4            Mfg Date            : 22-OCT-2008       
HubFpga rev         : 0x53              HubFpga file rev    : 0x53              
SpiFpga rev         : 0x13              SpiFpga file rev    : 0x13              
IPPA memory         : 1024 MB           EPPA memory         : 1024 MB           
Voltage 1.500V      : 1.513 (+1%)       Voltage 1.800V      : 1.813 (+1%)        
Voltage 2.500V      : 2.469 (-1%)       Voltage 3.300V      : 3.304 (+0%)        
Temperature         : NORMAL (51 C)      
Card Status         : HW initialized    POD Status          : Success           
ODD Status          : Not Available      
Fail LED            : Off               Active LED          : On                
Standby LED         : Invalid            
Chass Entitlement   : All (0x0)          
Ports Entitled      : All                
Active Alarms       : NONE 
  
  
  
  
  
From:redback-nsp-bounces at puck.nether.net [mailto:redback-nsp-bounces at puck.nether.net] On Behalf Of Navin Nepali
Sent: Saturday, June 25, 2011 9:26 AM
To: redback-nsp at puck.nether.net
Subject: [rbak-nsp] FPGA version Mismatch   
  
I am quite unclear. When my se800 bootup, in the post message i can see the following mismatch:  
   
Jun 25 21:43:28 Redback csm: FPGA mismatch detected on card ge3-4-port in slot 5
Jun 25 21:43:36 Redback csm: FPGA mismatch detected on card ge3-4-port in slot 6  
   
However, when i check " show chassis", i don't see FPGA mismatch issue in these cards.  
   
Do i still need to upgrade the FPGA version?  
   
Thanks  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20110626/cf1ce5aa/attachment.html>