[rbak-nsp] Radius Attribute for adding tag to route - RB-Route-Tag

[Tomas Lynch]

Lucy,

I think you can only setup one tag for static routes either configured
with "ip route" command or through radius.

Tomás

On Mon, Nov 28, 2011 at 6:27 AM, Lucy West <lucy.west at easynet.com> wrote:
> Hello! Thanks so much for your advice; have you tried applying 2 tags? We're seeing that if we set 2 tags in radius, only one attaches - the second gets ignored...
> thanks
> Lucy
>
>
>
> -----Original Message-----
> From: Tomas Lynch [mailto:tomas.lynch at gmail.com]
> Sent: 25 November 2011 17:55
> To: Lucy West
> Cc: redback-nsp at puck.nether.net
> Subject: Re: [rbak-nsp] Radius Attribute for adding tag to route - RB-Route-Tag
>
> Lucy,
>
> For some strange reason the tag from radius is translated into what you are receiving in the SE100. We were applying tag 500 and was translated into 892350464.
>
> I haven't found any relationship between those numbers and I don't think is a linear calculation (a X + b = Y) no hexadecimal into decimal or similar.
>
> Anyway, the feature is working and assigning different tag to routes.
> You may have to setup a rosetta stone to translate them.
>
> Tomás
>
> On Fri, Nov 25, 2011 at 8:48 AM, Lucy West <lucy.west at easynet.com> wrote:
>> Hi – anyone know/used the radius attribute for getting a Redback to
>> add a tag to a route?
>>
>> We’ve tried using ‘RB-Route-Tag="122"’ but this results in the Redback
>> (SE100) applying ‘Tag 825373195’.
>>
>> Any info/examples much appreciated…..
>>
>> lucy
>>
>>
>>
>>
>> _______________________________________________
>> redback-nsp mailing list
>> redback-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/redback-nsp
>>