[rbak-nsp] Radius Attribute for adding tag to route - RB-Route-Tag

[Lucy West]

Hello! Thanks so much for your advice; have you tried applying 2 tags? We're seeing that if we set 2 tags in radius, only one attaches - the second gets ignored...
thanks
Lucy

 

-----Original Message-----
From: Tomas Lynch [mailto:tomas.lynch at gmail.com] 
Sent: 25 November 2011 17:55
To: Lucy West
Cc: redback-nsp at puck.nether.net
Subject: Re: [rbak-nsp] Radius Attribute for adding tag to route - RB-Route-Tag

Lucy,

For some strange reason the tag from radius is translated into what you are receiving in the SE100. We were applying tag 500 and was translated into 892350464.

I haven't found any relationship between those numbers and I don't think is a linear calculation (a X + b = Y) no hexadecimal into decimal or similar.

Anyway, the feature is working and assigning different tag to routes.
You may have to setup a rosetta stone to translate them.

Tomás

On Fri, Nov 25, 2011 at 8:48 AM, Lucy West <lucy.west at easynet.com> wrote:
> Hi – anyone know/used the radius attribute for getting a Redback to 
> add a tag to a route?
>
> We’ve tried using ‘RB-Route-Tag="122"’ but this results in the Redback
> (SE100) applying ‘Tag 825373195’.
>
> Any info/examples much appreciated…..
>
> lucy
>
>
>
>
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp
>