[rbak-nsp] adding IPV6 License Key

[Judith Sanders]

I have just acquired the license key to active IPV6 on my SE800 and 2 SE400 Smartedge routers, I also have a test  chassis SE100. I have activated this on my test SE100 without any issue, but when I try to add the license key to either the SE800 or SE400 I get an error: Incorrect password for module: ipv6. I am running SEOS-6.2.1.7-Release on all my production devices, they have XCRP3 modules, but Ericsson told me we could run IPV6 on these.  Any ideas?

Judith Sanders
Pioneer Telephone
Inside Plant Networking Services
jasanders at ptci.com<mailto:jasanders at ptci.com> 405.375.0645
"It takes courage to grow up and turn out to be who you really are."
- e. e. cummings




***************************
This email message and any files transmitted with it are intended solely 
for the use of the individual or entity  for whom it is addressed.  It 
may contain confidential and privileged information. If you are not the 
intended recipient, please contact the sender and destroy all paper and 
electronic copies of this message and its contents.  Any unauthorized 
review, use, disclosure or distribution of this email or any file 
attachments is strictly prohibited.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20111129/e44c9e49/attachment.html>