[rbak-nsp] adding IPV6 License Key

[Marcin Kuczera]

Judith Sanders wrote:
> I have just acquired the license key to active IPV6 on my SE800 and 2 
> SE400 Smartedge routers, I also have a test  chassis SE100. I have 
> activated this on my test SE100 without any issue, but when I try to add 
> the license key to either the SE800 or SE400 I get an error: Incorrect 
> password for module: ipv6. I am running SEOS-6.2.1.7-Release on all my 
> production devices, they have XCRP3 modules, but Ericsson told me we 
> could run IPV6 on these.  Any ideas?
> 

Is it IPv6 or ipv6 subscriber active ???
IPv6 should be ok for XCRP3 and 6.2, but subscribers will require 6.4 
and XCRP4 on SE400/800

Regards,
Marcin


>  
> 
> Judith Sanders
> 
> Pioneer Telephone
> 
> Inside Plant Networking Services
> 
> jasanders at ptci.com <mailto:jasanders at ptci.com> 405.375.0645
> 
> */"It takes courage to grow up and turn out to be who you really are."
> – e. e. cummings/*
> 
>  
> 
>  
> 
> 
> 
> ***************************
> This email message and any files transmitted with it are intended solely
> for the use of the individual or entity  for whom it is addressed.  It
> may contain confidential and privileged information. If you are not the
> intended recipient, please contact the sender and destroy all paper and
> electronic copies of this message and its contents.  Any unauthorized
> review, use, disclosure or distribution of this email or any file
> attachments is strictly prohibited.
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp