[rbak-nsp] ether-12-port not functioning

[Navin Nepali]

Yes i moved the card from slot 2 to 3 for checking.
How to rectify the EEPROM issue? Need to change the whole card or is there any other way to resolve it?
 
Thanks
 

________________________________
 From: Marcin Kuczera <marcin at leon.pl>
To: Navin Nepali <navin_n at yahoo.com> 
Cc: "denis.mikhaylovskiy at ericsson.com" <denis.mikhaylovskiy at ericsson.com>; "redback-nsp at puck.nether.net" <redback-nsp at puck.nether.net> 
Sent: Thursday, February 16, 2012 3:58 PM
Subject: Re: [rbak-nsp] ether-12-port  not functioning
  
Navin Nepali wrote:
> The following are the details of the POD.
>   [ntc]htd_bras#show diag pod card 3 detail
> Slot Type                                                 POD status (Enabled)
> ---- --------------------------------                    ----------------------
> 3    none                                                                                                      Card Type Valid                                              FAIL
> [ntc]htd_bras#
> [ntc]htd_bras#
>  

well,
from your log:
Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/12 link state DOWN, admin is DOWN

So if port ID is 2/12 then slot number is 2.
Your printout is from slot 3..

Or I don't undestand something.. did you move the card from slot 2 to 3 ?
If yes, it looks like you have a EEPROM content fault..

Regards,
Marcin



>   What may be the issue?
> 
> *From:* Marcin Kuczera <marcin at leon.pl>
> *To:* Navin Nepali <navin_n at yahoo.com>
> *Cc:* "denis.mikhaylovskiy at ericsson.com" <denis.mikhaylovskiy at ericsson.com>; "redback-nsp at puck.nether.net" <redback-nsp at puck.nether.net>
> *Sent:* Thursday, February 16, 2012 3:13 PM
> *Subject:* Re: [rbak-nsp] ether-12-port not functioning
> 
> Navin Nepali wrote:
>  > Suddenly our SE800 ether-12-port  card didn't work. Hardware status shows the card is not installed. Please kindly help me to resolve this issue.
>  >  What may be the problem?
> 
> You have to run diagnostics for this card:
> 
> [local]SE600(config)#card ether-12-port 2
> [local]SE600(config-card)#shutdown
> [local]SE600(config-card)#on-demand-diagnostic
> [local]SE600(config-card)#end
> 
> then
> [local]SE600#diag on-demand card 2 level 2
> 
> I think that level 2 is enough to see, probably level 1 will show some issues.
> 
> If you have removed and insert the card, there should be POD log in system, so drop here output of:
> [local]SE600#show diag pod card 2 detail
> 
> 
> Regards,
> Marcin
> 
> 
>  >  Feb 15 21:25:56: %CSM-6-CARD: Initialization failure on card ether-12-port in sl
>  > ot 2
>  > Feb 15 21:25:56: %SYSLOG-2-CRIT: /netbsd: Marking PTD channel DEAD for slot 2
>  > Feb 15 21:25:56: %CSM-6-CARD: card ether-12-port REMOVED in slot 2
>  > Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/1 link state DOWN, admin is UP
>  > Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/2 link state DOWN, admin is UP
>  > Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/3 link state DOWN, admin is UP
>  > Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/5 link state DOWN, admin is DOWN
>  > Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/6 link state DOWN, admin is DOWN
>  > Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/10 link state DOWN, admin is DOWN
>  > Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/11 link state DOWN, admin is DOWN
>  > Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/12 link state DOWN, admin is DOWN
>  >  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %SYSLOG-2-CRIT: /netbsd:
>  > Marking PTD channel DEAD for slot 2  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-CARD: card ether-1
>  > 2-port REMOVED in slot 2  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/1
>  >  link state DOWN, admin is UP  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/2
>  >  link state DOWN, admin is UP  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/3
>  >  link state DOWN, admin is UP  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/5
>  >  link state DOWN, admin is DOWN  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/6
>  >  link state DOWN, admin is DOWN  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/1
>  > 0 link state DOWN, admin is DOWN  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/1
>  > 1 link state DOWN, admin is DOWN  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/1
>  > 2 link state DOWN, admin is DOWN
>  >
>  > ------------------------------------------------------------------------
>  >
>  > _______________________________________________
>  > redback-nsp mailing list
>  > redback-nsp at puck.nether.net <mailto:redback-nsp at puck.nether.net>
>  > https://puck.nether.net/mailman/listinfo/redback-nsp
> 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20120216/584a463c/attachment.html>