[rbak-nsp] ether-12-port not functioning

[Marcin Kuczera]

Navin Nepali wrote:
> Yes i moved the card from slot 2 to 3 for checking.
> How to rectify the EEPROM issue? Need to change the whole card or is 
> there any other way to resolve it?

I'am afraid it is too risky...
It is better to buy new linecard. Digging on PCB may be destructive for 
whole SE800 if something goes wrong..

Regards,
Marcin


>  
> Thanks
> 
> *From:* Marcin Kuczera <marcin at leon.pl>
> *To:* Navin Nepali <navin_n at yahoo.com>
> *Cc:* "denis.mikhaylovskiy at ericsson.com" 
> <denis.mikhaylovskiy at ericsson.com>; "redback-nsp at puck.nether.net" 
> <redback-nsp at puck.nether.net>
> *Sent:* Thursday, February 16, 2012 3:58 PM
> *Subject:* Re: [rbak-nsp] ether-12-port not functioning
> 
> Navin Nepali wrote:
>  > The following are the details of the POD.
>  >  [ntc]htd_bras#show diag pod card 3 detail
>  > Slot Type                                                POD status 
> (Enabled)
>  > ---- --------------------------------                    
> ----------------------
>  > 3    none                                                            
>                                           Card Type Valid                
>                               FAIL
>  > [ntc]htd_bras#
>  > [ntc]htd_bras#
>  > 
> 
> well,
> from your log:
> Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/12 link state DOWN, admin is DOWN
> 
> So if port ID is 2/12 then slot number is 2.
> Your printout is from slot 3..
> 
> Or I don't undestand something.. did you move the card from slot 2 to 3 ?
> If yes, it looks like you have a EEPROM content fault..
> 
> Regards,
> Marcin
> 
> 
> 
>  >  What may be the issue?
>  >
>  > *From:* Marcin Kuczera <marcin at leon.pl <mailto:marcin at leon.pl>>
>  > *To:* Navin Nepali <navin_n at yahoo.com <mailto:navin_n at yahoo.com>>
>  > *Cc:* "denis.mikhaylovskiy at ericsson.com 
> <mailto:denis.mikhaylovskiy at ericsson.com>" 
> <denis.mikhaylovskiy at ericsson.com 
> <mailto:denis.mikhaylovskiy at ericsson.com>>; "redback-nsp at puck.nether.net 
> <mailto:redback-nsp at puck.nether.net>" <redback-nsp at puck.nether.net 
> <mailto:redback-nsp at puck.nether.net>>
>  > *Sent:* Thursday, February 16, 2012 3:13 PM
>  > *Subject:* Re: [rbak-nsp] ether-12-port not functioning
>  >
>  > Navin Nepali wrote:
>  >  > Suddenly our SE800 ether-12-port  card didn't work. Hardware 
> status shows the card is not installed. Please kindly help me to resolve 
> this issue.
>  >  >  What may be the problem?
>  >
>  > You have to run diagnostics for this card:
>  >
>  > [local]SE600(config)#card ether-12-port 2
>  > [local]SE600(config-card)#shutdown
>  > [local]SE600(config-card)#on-demand-diagnostic
>  > [local]SE600(config-card)#end
>  >
>  > then
>  > [local]SE600#diag on-demand card 2 level 2
>  >
>  > I think that level 2 is enough to see, probably level 1 will show 
> some issues.
>  >
>  > If you have removed and insert the card, there should be POD log in 
> system, so drop here output of:
>  > [local]SE600#show diag pod card 2 detail
>  >
>  >
>  > Regards,
>  > Marcin
>  >
>  >
>  >  >  Feb 15 21:25:56: %CSM-6-CARD: Initialization failure on card 
> ether-12-port in sl
>  >  > ot 2
>  >  > Feb 15 21:25:56: %SYSLOG-2-CRIT: /netbsd: Marking PTD channel DEAD 
> for slot 2
>  >  > Feb 15 21:25:56: %CSM-6-CARD: card ether-12-port REMOVED in slot 2
>  >  > Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/1 link state DOWN, admin 
> is UP
>  >  > Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/2 link state DOWN, admin 
> is UP
>  >  > Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/3 link state DOWN, admin 
> is UP
>  >  > Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/5 link state DOWN, admin 
> is DOWN
>  >  > Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/6 link state DOWN, admin 
> is DOWN
>  >  > Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/10 link state DOWN, admin 
> is DOWN
>  >  > Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/11 link state DOWN, admin 
> is DOWN
>  >  > Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/12 link state DOWN, admin 
> is DOWN
>  >  >  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 15 21:25:56: 
> %SYSLOG-2-CRIT: /netbsd:
>  >  > Marking PTD channel DEAD for slot 2  Feb 15 21:25:56: 
> %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-CARD: card ether-1
>  >  > 2-port REMOVED in slot 2  Feb 15 21:25:56: %LOG-6-SEC_STANDBY: Feb 
> 15 21:25:56: %CSM-6-PORT: ethernet 2/1
>  >  >  link state DOWN, admin is UP  Feb 15 21:25:56: 
> %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/2
>  >  >  link state DOWN, admin is UP  Feb 15 21:25:56: 
> %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/3
>  >  >  link state DOWN, admin is UP  Feb 15 21:25:56: 
> %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/5
>  >  >  link state DOWN, admin is DOWN  Feb 15 21:25:56: 
> %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/6
>  >  >  link state DOWN, admin is DOWN  Feb 15 21:25:56: 
> %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/1
>  >  > 0 link state DOWN, admin is DOWN  Feb 15 21:25:56: 
> %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/1
>  >  > 1 link state DOWN, admin is DOWN  Feb 15 21:25:56: 
> %LOG-6-SEC_STANDBY: Feb 15 21:25:56: %CSM-6-PORT: ethernet 2/1
>  >  > 2 link state DOWN, admin is DOWN
>  >  >
>  >  > 
> ------------------------------------------------------------------------
>  >  >
>  >  > _______________________________________________
>  >  > redback-nsp mailing list
>  >  > redback-nsp at puck.nether.net <mailto:redback-nsp at puck.nether.net> 
> <mailto:redback-nsp at puck.nether.net <mailto:redback-nsp at puck.nether.net>>
>  >  > https://puck.nether.net/mailman/listinfo/redback-nsp
>  >
>  >
>  >
> 
> 
>