[rbak-nsp] fege-60-2-port card issue

[Navin Nepali]

Hello:
I have just installed new fege-60-2-port card in SE800 but after sometime the card is automatically disabled. From the log i can see the temperature issue. But I don't understand why only this card is shutting down whereas in same SE800 other cards are running normally.  Even the POD shows all pass.
Kindly suggest me what may be the problem. Is there specific slot to install this card or I can install it in any slot?
 
 
Feb 26 19:21:23: %CSM-6-CARD: card fege-60-2-port INSERTED in slot 2
 Feb 26 19:21:23: %LOG-6-SEC_STANDBY: Feb 26 19:21:23: %CSM-6-CARD: card fege-60-2-port INSERTED in slot 2  
 Feb 26 19:21:23: %LOG-6-SEC_STANDBY: Feb 26 19:21:23: %CSM-6-CARD: slot 2, ALARM_CLEARED: Circuit pack overheating: extremely hot  
Feb 26 19:21:24: %CSM-6-CARD: slot 2, ALARM_CLEARED: Circuit pack overheating: extremely hot
Feb 26 19:21:26: [0001]: %SNMP-6-INFO: entConfigChange notification sent to 202.70.64.11:162
Feb 26 19:21:26: [0001]: %SNMP-6-INFO: rbnCardAlarm notification sent to 202.70.64.11:162
Feb 26 19:21:30: %PPAINFRA-6-ISTART_INFO: 18ab7635/0000000001/118500000:02/IPPA/EU00:Ready to
 receive packets
Feb 26 19:21:30: %QOS-6-INFO: qos info: PPA just reborn 0
Feb 26 19:21:30: [0001]: %RIB-6-INFO: [rib_reg_ppa_slot]: ep_name:FIB
 SLOT 02/0 ppa_msg_slot:1 (local_slot:1) oper:1 line_cards:2 state:0
Feb 26 19:21:30: [0001]: %RIB-6-INFO: [rib_proc_slot_bringup]: slot:1 (slot_reset:FALSE) slot_state:0 ep_state 0
Feb 26 19:21:30: [0001]: %RIB-6-INFO: [rib_reset_slot_versions_for_all_contexts]: reset slot(1) versions
Feb 26 19:21:30: [0001]: %RIB-6-INFO: [rib_ppa_tbl_create]: FIB SLOT 02/0 slot_no:1 table created 
Feb 26 19:21:30: [0001]: %RIB-6-INFO: [rib_proc_slot_bringup]: slot_state(1) and reg_state(1) ep_state 1(EP_ALIVE)
Feb 26 19:21:30: [0001]: %RIB-6-INFO: [rib_reg_ppa_slot] New-register slot: 1 PPA Ep name=FIB SLOT 02/0 eppa 0 slot 1 rc:0
Feb 26 19:21:30: %QOS-6-INFO: qos info: iPPA reg on slot 2
Feb 26 19:21:30: %PPAINFRA-6-ISTART_INFO: 2adf7029/0000000001/943900000:02/EPPA/EU00:Ready to receive packets
Feb 26 19:21:31: %CSM-6-CARD: card fege-60-2-port INSERTED in slot 2 READY
 Feb 26 19:21:31:
 %LOG-6-SEC_STANDBY:
 Feb 26 19:21:31: %CSM-6-CARD: card fege-60-2-port INSERTED in slot 2 READY  
Feb 26 19:21:31: [0001]: %RIB-6-INFO: [rib_reg_ppa_slot]: ep_name:FIB SLOT 02/1 ppa_msg_slot:1 (local_slot:17) oper:1 line_cards:3 state:0
Feb 26 19:21:31: [0001]: %RIB-6-INFO: [rib_proc_slot_bringup]: slot:17 (slot_reset:FALSE) slot_state:0 ep_state 0
Feb 26 19:21:31: [0001]: %RIB-6-INFO: [rib_reset_slot_versions_for_all_contexts]: reset slot(17) versions
Feb 26 19:21:31: [0001]: %RIB-6-INFO: [rib_ppa_tbl_create]: FIB SLOT 02/1 slot_no:17 table created 
Feb 26 19:21:31: [0001]: %RIB-6-INFO: [rib_proc_slot_bringup]: slot_state(1) and reg_state(1) ep_state 1(EP_ALIVE)
Feb 26 19:21:31: [0001]: %RIB-6-INFO: [rib_reg_ppa_slot] New-register slot: 17 PPA Ep name=FIB SLOT 02/1 eppa 1 slot 1 rc:0
Feb 26 19:21:31: %QOS-6-INFO: qos info: PPA just reborn 0
Feb 26 19:21:31: %QOS-6-INFO: qos info: ePPA reg on slot 2
 Feb 26 19:21:33: %LOG-6-SEC_STANDBY:
 Feb 26 19:21:33: %CSM-6-PORT: ethernet 2/1 link state UP, admin is UP  
 Feb 26 19:21:33: %LOG-6-SEC_STANDBY: Feb 26 19:21:33: %CSM-6-PORT: ethernet 2/2 link state UP, admin is UP  
 Feb 26 19:21:33: %LOG-6-SEC_STANDBY: Feb 26 19:21:33: %CSM-6-PORT: ethernet 2/10 link state UP, admin is UP  
Feb 26 19:21:33: %CSM-6-PORT: ethernet 2/1 link state UP, admin is UP
Feb 26 19:21:33: %CSM-6-PORT: ethernet 2/2 link state UP, admin is UP
Feb 26 19:21:33: %CSM-6-PORT: ethernet 2/10 link state UP, admin is UP
 Feb 26 19:21:33: %LOG-6-SEC_STANDBY: Feb 26 19:21:33: %CSM-6-PORT: ethernet 2/11 link state UP, admin is UP  
Feb 26 19:21:33: %CSM-6-PORT: ethernet 2/11 link state UP, admin is UP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20120227/73fbcca3/attachment-0001.html>