[rbak-nsp] Is this a serious error? How to interpretate this failure.
Dariusz Siedlecki
siedar at pronet.lublin.pl
Mon Feb 27 07:57:17 EST 2012
[local]Redback#sh diag on-demand card 3 detail
Slot Number : 3
Card Type : 10ge-1-port
Detected Card Type : 10ge-1-port
Test Level : 2
Loop Count : 1
Start Time : 12:25:04 02/27/2012 (UTC)
Completion Time : 12:31:35 02/27/2012 (UTC)
Test Summary : 1 Failure
Test Results Loop 1:
Card Type Valid : Passed
EPPA SCL : Passed
IPPA SCL : Passed
SCL Hub : Passed
Verify Card Type : Passed
Verify EEPROM Check Sum : Passed
IPPA file load (zero.bin) : Passed
IPPA Memory : Passed
EPPA file load (zero.bin) : Passed
EPPA Memory : Passed
Lim Fpga Register : Passed
IPPA SRAM Mem Test : Passed
Extended IPPA Mem Test : Passed
EPPA SRAM Mem Test : Passed
Extended EPPA Mem Test : Failed
SCL Stress : Passed
PMA2 Register Test : Passed
XFP Interface Test : Passed
XFP Present : Passed
ADM1026 Temperature Access Test : Passed
ADM1026 Temperature Test : Passed
ADM1026 Voltage Test : Passed
Test Failure Details:
- Extended EPPA Mem Test, slot 3, scl 4
PPA_MEMTEST_MCT_SBE
SBE Error MCT 1, DRC 1, Address Offset 0x0af245f0, ECC data
0x00000001, BitNo
32
- Extended EPPA Mem Test, slot 3, scl 4
PPA_MEMTEST_MCT_SBE
ECC Info MCT 1, DRC 1, Regs[0..3] 0x0af245f3.00000001.0700c20f.000000db
- Extended EPPA Mem Test, slot 3
PPA_MEMTEST_FAIL
Function return value 1
- Extended EPPA Mem Test, slot 3, scl 4
PPA_MEMTEST_FAIL
PPA Memtest walking ones failed.
best regards,
Darek
More information about the redback-nsp
mailing list