[rbak-nsp] Memory upgrade on GE- card

[Mulindwa]

Dear All,

Am trying to upgrade memory on the gigaether-4-port card, however , after putting memory on board, card does not come up.

IS there a pattern of putting the memory chips on the card.

Show hardware

	* 4    gigaether-4-port     8K505040502560  50   4 12-MAY-2005 N/A      N/A 
sh hardware card 4 detail 

Slot              : 4                Type              : gigaether-4-port
Serial No         : 8K505040502560   Hardware Rev      : 50              
EEPROM id/ver     : 0x5a/4           Mfg Date          : 12-MAY-2005     
SysFpga rev       : 0x0              SysFpga file rev  : N/A             
LimFpga rev       : 0x0              LimFpga file rev  : N/A             
FlipFpga rev      : 0x0              FlipFpga file rev : N/A             
IPPA memory       : N/A              EPPA memory       : N/A             
Voltage           : N/A              Temperature       : N/A              
Card Status       : HW failure       POD Status        : Fail            
Card State        : PPA download failure
ODD Status        : Not Available                                               
Fail LED          : N/A              Active LED        : N/A             
Standby LED       : N/A              
Chass Entitlement : SE400/SE800      
Ports Entitled    : All              
Active Alarms     : Circuit pack power-on diagnostic failed
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20120229/f6d202ca/attachment.html>