[rbak-nsp] Active user with IP address

Judith Sanders jasanders at ptci.com
Tue Sep 4 11:14:01 EDT 2012


Is there a command to determine what user is using a particular IP address in the Redback SE800?
I know about the sh sub active ...etc. but I want to see if I can type in an IP address from our pool and it tells me
what user is assigned to this.
We can use our Radius to track down this information just wondered if it is applicable on the SE itself?

Judith Sanders
Pioneer Telephone
Inside Plant Networking Services
jasanders at ptci.com<mailto:jasanders at ptci.com> 405.375.0645
"Think and wonder, wonder and think."
Dr. Seuss<http://www.goodreads.com/author/show/61105.Dr_Seuss>





***************************
This email message and any files transmitted with it are intended solely 
for the use of the individual or entity  for whom it is addressed.  It 
may contain confidential and privileged information. If you are not the 
intended recipient, please contact the sender and destroy all paper and 
electronic copies of this message and its contents.  Any unauthorized 
review, use, disclosure or distribution of this email or any file 
attachments is strictly prohibited.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20120904/31753a53/attachment.html>


More information about the redback-nsp mailing list