[rbak-nsp] SE100 loop reboot
noruni at gmail
norujames at gmail.com
Thu Sep 6 07:52:00 EDT 2012
Hello there.
I have a SE100, wich work well, unless, i do a reset.
now the box is on a reboot loop continuously.
hope someone alreday have this kind of problem.
here are the log:
=====
OpenFirmware 2.0.1.4 PRODUCTION RELEASE
Copyright (c) 1997-2007 by Redback Networks, Inc.
Compiled 2007-Jan-16 20:35:23 GMT by Release Team
Primary OFWBIN: main is running; startType = 2; flags = 0x1; dramSize = 1024 MB
Starting PPC1...Success!
PPC0 init: sdram size=1024, boot_type=0x2,
PIR=0x00000000, MSR=0x00002000, machine check disabled.
L1 cache enabled.
Initializing L2 Cache...done
Installing package root...done
Installing package failsafe...done
Installing package powerpc_cpu...done
Installing package display...done
Installing package openprom...done
Installing package client-services...done
Extending package /openprom with SE PROM properties...done
Extending package /openprom/client-services with SEOFW methods...done
Installing package memory...done
Installing package flash...done
Initializing /options from nv config var...done
Installing package deblocker...done
Installing package disklabel...done
Installing package ide...done
Installing package eeprom...Management port MAC address = 00:30:88:22:f3:f2
done.
Installing package ethernet ...done
Installing package obptftp...done
Extending package /chosen with SE properties...Done
loading System FPGA from bootrom...Checksum verified.
Verifying shark fpga file: Rev 9
shark FPGA downloaded, verifying...done.
AC power input status OK
Power Supply 12VDC status indicates OK
Initializing CF disks...CF-X indicates 'External Compact Flash is not present', continuing...done
Welcome to SmartFirmware(tm) for Redback Networks, PowerPC version 2.0.1.4
Copyright (c) 1997-2007 by Redback Networks, Inc.
SmartFirmware(tm) Copyright 1996-2000 by CodeGen, Inc.
All Rights Reserved.
Minikernel Version: 2.7
Executing POST
Thu 9/06/2012 11:43:14
Internal Temp = 25 C
PPC0 Temp = 46 C
IPPA Temp = 28 C
Supply 1.1v reads 1.107v
Supply 1.2v reads 1.196v
Supply 1.5v reads 1.494v
Supply 1.8v reads 1.787v
Supply 2.5v reads 2.490v
Supply 2.6v reads 2.608v
Supply 3.3v reads 3.304v
Supply 12.0v reads 12.094v
Fan 1 tach speed: 4326 RPM
Fan 2 tach speed: 4440 RPM
Fan 3 tach speed: 4326 RPM
Fan 4 tach speed: 4687 RPM
Fan 5 tach speed: 4218 RPM
PASSED Loop 1 of 1, 2012/09/06 11:43:15
POST PASSED
Auto-boot in 0 seconds - press se* to abort, ENTER to boot: inflating image from 0x560001F, 6544256 bytes, to 0x5C3DB9F, 37801390 bytes
copying inflated image from 0x5C3DB9F, to 0x5600000, 37801390 bytes
Flushing caches...done
Creating vxWorks bootline...done.
Waiting for PPC1...ready to run.
Checksum verification succeeded.
loading System FPGA from Compact Flash...done
inflating image from 0x5600017, 40101 bytes, to 0x5609CBC, 212424 bytes
copying inflated image from 0x5609CBC, to 0x5600000, 212424 bytes
Verifying shark fpga file: Rev 9
Not reloading System FPGA, versions match.
Flushing caches...done
launching (entry=0x05a00000)...
MPSC Lives!
SEOFW: bound to kernel printf()
OFW VERSION: PowerPC,rev2.0.1.4
MINIKERNEL VERSION: 2.7
BOOTPATH: /ide at 0/disk at 1,0:a
BOOTARGS: /p01/netbsd
BOOTDIR: /p01
NetBSD 1.5.3 (CUSTOM_SE100) #0: Fri Oct 26 11:43:31 PDT 2007
sysbuild at lx-dev4:/home/sysbuild/builds/REL_6_1_1_X/pkt/sw/netbsd153/usr/src/sys/arch/se100/compile/CUSTOM_SE100
CPU: 7447 (Revision 101)
total memory = 939 MB
avail memory = 770 MB
using 1024 buffers containing 4096 KB of memory
Dumpspace: 0xe90f8000
The controller card is in slot 1
mainbus0 (root)cpu0 at mainbus0
L2CR: 0xC0000000: : unknown size Flow-through synchronous burst SRAM with parity backside cache enabled
vxmem0 at mainbus0gt0 at mainbus0gtpci0 at gt0obio0 at gt0obio1 at gt0wdc1 at obio1
Establishing IRQ 71 of type 3 level 6, func 0x5a070d0 arg 0xe0fe3c88
Orig CFB Control Status Reg 0
CFB Control Status Reg 0
timeout in wdcwait: wdc1:0, time:20001, set time:20000
timeout in wdcwait: wdc1:0, time:20001, set time:20000
wd1 at wdc1 channel 0 drive 0: <STI Flash 7.2.0 RBAKCF512JI> < STI1J84506215180938>
wd1: drive supports 1-sector pio transfers, lba addressing
wd1: 488 MB, 993 cyl, 16 head, 63 sec, 512 bytes/sect x 1000944 sectors
wd1: drive supports PIO mode 4
conf[0] = 0x88104821
Orig CFB PIO Timing Reg 9480c82
CFB PIO Timing Reg 88104821
extcf0 at obio1External disk presence status 40
Establishing IRQ 64 of type 3 level 6, func 0x5baac34 arg 0x1
Establishing IRQ 65 of type 3 level 6, func 0x5baac34 arg 0x2
Establishing IRQ 67 of type 3 level 6, func 0x5baac34 arg 0x8
Establishing IRQ 68 of type 3 level 6, func 0x5baac34 arg 0x10
Establishing IRQ 75 of type 3 level 6, func 0x5baac34 arg 0x800
SHARK FPGA: Rev 9, base = 0xe48c7000 status = 0, flag = 0
obio2 at gt0rtc0 at obio2ds3050 reg attached @ 0xe90fa000
Current date : century : 21, 09/06/12 (Thu)
Current time : 11:43:42
obio3 at gt0obio4 at gt0gfe0 at gt0gfe unit # 0
gfe attach called
: address 00:30:88:22:f3:f2, pcr 0x3c00000, pcxr 0, psc 0x1e20218, psr 0x1c1c , phy 1 (mii)
pcr 0x80, pcxr 0, psc 0x1e0021e
brgphymatch...
OUI = 2072, MODEL = 12brgphy0 at gfe0 phy 1OUI = 2072, MODEL = 12: Media interface
: BCM5461 1000BASE-T media interface, rev. 1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
Establishing IRQ 32 of type 3 level 5, func 0x5b9b6d8 arg 0xe0fe8800
gfe0: interrupting at 32+0
gtmpsc0 at gt0 at 0xe91fd000/0x8a99000Establscc0 at mainbus0 Local SCC @ 0x60000000 Remote SCC @ 0x00000000
Mapping in 0x00200000 bytes starting @ 0x64000000 for PTD driver (pa=0x38000000)
ipc0 at mainbus0Mapped Shared Memory Block @ PA 0x5500000 to VA 0x5500000
Establishing IRQ 60 of type 3 level 5, func 0x5b8b6c4 arg 0x0
flashattach: configuring 1 flash device(s)
PPA Transport Driver v. 1.0
init_ptd_sccmem: Init. SCC SDRAM for PTD driver...Done
## ptdmem_add: npg 480 size 1966080 bmapsz 60 (pg 0xe0fe0880) ##
pdtattach: configuring 2 pdt devices
Initializing RTC NVRAM LOG area @ f4001400 succeeded
scc_init: Mapped vxWorks memory console @0xe920f000
Kick_starting vxWorks ....
vxWorks is booting!!!!!
Waiting for Vxworks to boot ...
.VX Redundancy state: ### VX_IS_ACTIVE TRUE ###
Notifying all processes of ACTIVE status
VX Redundancy state: ### VX_ACTSTB_DECIDED TRUE ###
VX Redundancy state: ### VX_BOOT_DONE TRUE ###
start using scc to keep time...
I am active
set max route entry to 190650
booted_partition: 0
boot device: wd1
root on wd1a
mountroot: trying msdos...
mountroot: trying nfs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/p01/sbin/init' 15
** /dev/rwd1a
** File system is clean; not checking
/dev/wd1a on / type ffs (local)
mfs:9 on /tmp type mfs (asynchronous, local)
Sep 6 22:44:22 init: Starting in normal mode
Bogus slot/backplane (1/13), using default.
Bogus slot/backplane (1/13), using default.
Bogus slot/backplane (1/13), using default.
Bogus slot/backplane (1/13), using default.
pid 442 (syslogd), uid 0: exited on signal 11 (core dumped)
pid 443 (loggd), uid 0: exited on signal 11 (core dumped)
Sep 6 22:44:31 init: loggd terminated. Restarting.
pid 446 (loggd), uid 0: exited on signal 11 (core dumped)
pid 447 (inetd), uid 0: exited on signal 11 (core dumped)
Sep 6 22:44:39 init: loggd terminated. Restarting.
/bin/inetd exited because of signal 11
Sep 6 22:44:39 init: A core file of /bin/inetd was produced
A core file of /bin/inetd was produced
Sep 6 22:44:39 init: bootdev: wd1
Set BSD Redundancy state: ### BSD_COPY_DONE TRUE ###
pid 448 (loggd), uid 0: exited on signal 11 (core dumped)
VX Redundancy state: ### VX_BOOT_DONE TRUE ###
Sep 6 22:44:40 init: checking status of vxWorks...
Sep 6 22:44:40 init: Syncing time from RTC...
Sep 6 22:44:40 init: Starting PM...
Bogus slot/backplane (1/13), using default.
pid 449 (pm), uid 0: exited on signal 11 (core dumped)
pid 450 (exec_cli), uid 0: exited on signal 11 (core dumped)
Sep 6 22:44:48 init: loggd terminated. Restarting.
/usr/siara/bin/exec_cli exited because of signal 11
Sep 6 22:44:48 init: A core file of /usr/siara/bin/exec_cli was produced
A core file of /usr/siara/bin/exec_cli was produced
Restarting console CLI....
Sep 6 22:44:48 init: Process Manager (PM) terminated. Rebooting system.
Process Manager (PM) terminated. Rebooting system./usr/siara/bin/pm exited because of signal 11
Sep 6 22:44:48 init: A core file of /usr/siara/bin/pm was produced
A core file of /usr/siara/bin/pm was produced
Sep 6 22:44:48 init: Reboot flag set, rebooting system!
In doReboot 1
pid 451 (loggd), uid 0: exited on signal 11 (core dumped)
pid 452 (exec_cli), uid 0: exited on signal 11 (core dumped)
some one sent SIGTSTP
VX Redundancy state: ### VERSION B3 TRUE ###
VX Redundancy state: ### VX_IS_ACTIVE TRUE ###
Notifying all processes of ACTIVE status
VX Redundancy state: ### VX_ACTSTB_DECIDED TRUE ###
syncing disks... done
unmounting / (/dev/wd1a)...
uvm_vnp_terminate(0xa6f3a90): terminating active vnode (refs=2)
uvm_vnp_terminate(0x8aad6c0): terminating active vnode (refs=2)
Bootstrap 2.0.1.4 PRODUCTION RELEASE
Copyright (c) 1997-2007 by Redback Networks, Inc.
Compiled 2007-Jan-16 20:37:15 GMT by Release Team
Primary Bootstrap: main is running; startType = 2
PPC0 reboot reason: Software-induced control-plane-only hard reset
NMI reason(s): (none)
PPC1 reboot reason: Software-induced control-plane-only hard reset
NMI reason(s): (none)
[00]: 80 08 07 0d 0b 02 48 00 - 04 60 70 02 82 08 08 01
[10]: 0e 04 08 01 02 20 c0 00 - 00 00 00 48 30 48 2a 80
[20]: 80 80 45 45 00 00 00 00 - 00 3c 48 30 2d 55 00 00
[30]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 10 91
[40]: 67 00 00 00 00 00 00 00 - 01 41 4d 50 33 37 31 44
[50]: 32 38 32 33 58 54 35 2d - 43 42 33 00 00 06 15 31
[60]: 33 34 32 34 00 00 00 00 - 00 00 00 00 00 00 00 00
[70]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
DRAMINIT: detected 1024 MB
Bootstrap: detected 1024 MB of DRAM
OFWBIN_ldinfo = 0xff8961a0 (48)
._lowest = 0x5000000
._highest = 0x5418fe0
._text = 0x5000000
._etext = 0x50ccec0
._data = 0x50ccec0
._edata = 0x50d6f20
._bss = 0x50d6f20
._end = 0x5418fe0
._entry = 0x5000000
OFWZBIN
cmp_base = 0xff8961d0
cmp_size = 0x5c98a
uncmp_size = 0xd6f20
uncmp_cksum = 0x86c6a053
OFWBIN_ZBIN: being decompressed
OFWBIN_BIN: entire loaded region being flushed
OFWBIN_BIN: entry being jumped to
=====
Thanks for any help
Noru
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20120906/7100eeb9/attachment-0001.html>
More information about the redback-nsp
mailing list