[rbak-nsp] Failed SE100 (PPA?)

[marcin at leon.pl]

On 06.09.2012 07:09, support at ecn.net.au wrote:
> Hi All
>
> We’ve got a SE100 that today had an issue.
>
> It appears the card 2 has failed and I think possibly it is the PPA
> memory.
>
> See below for the diag of card 2.
>
> Does anyone have any pointers on what may be able to be done to fix
> this or do we now officially have a door stop?


That's a hardware fault, I suppose that EPPA needs reballing/reflowing, 
this is a BGA fault for 99%
(thanks to stupid ROHS)

So - service stop...

Regards,
Marcin


> Best Regards
>
> Mark
>
> show card port
>
> Slot/Port:Ch:SubCh Type State
>
> 2/1 ethernet No card
>
> 2/2 ethernet No card
>
> 2/3 ethernet No card
>
> 2/4 ethernet No card
>
> --------------------------------------------------------------------
>
> Slot number : 2
>
> Configured-type : carrier
>
> Installed-type : carrier
>
> Initialized : No
>
> Card Admin State : No Shut
>
> IPPA running : No
>
> EPPA running : No
>
> Card PPAs Up : No
>
> Default Line Card : No
>
> MIC 1 : Config: ge-2-port Install: ge-2-port
>
> MIC 2 : Config: no MIC Install: no MIC
>
> Chassis Entitlement : All (0x0)
>
> Ports Entitled : All
>
> show diag pod card 2 detail
>
> Slot Type POD status (Enabled)
>
> ---- -------------------------------- ----------------------
>
> 2
>
> ** Carrier FAIL
>
> Start at 01:39:12 09/06/2012
>
> Card Type Valid PASS
>
> EPPA SCL 3 PASS
>
> EPPA SCL 4 PASS
>
> IPPA SCL 5 PASS
>
> IPPA SCL 6 PASS
>
> Controller FPGA Interface Test PASS
>
> Controller FPGA Register Test PASS
>
> Verify Controller FPGA Revision in FPGA File PASS
>
> ADM1026 Register Test PASS
>
> ADM1026 Fan Test PASS
>
> ADM1026 Temperature Test PASS
>
> ADM1026 Voltage Test PASS
>
> D3 Config Test PASS
>
> Controller FPGA Config Test PASS
>
> Data Path FPGA Config Test PASS
>
> Data Path FPGA Interface Test PASS
>
> Data Path FPGA Register Test PASS
>
> ---(more)---Sep 6 12:17:47: %LOG-6-TDM_CONS: 
> find_log_entries_byslot()
> failed, rc = 6 Sep 6 12:17:47: %LOG-6-TDM_CONS:
> find_log_entries_byslot() failed, rc = 6
>
> Verify Data Path FPGA Revision in FPGA File PASS
>
> IPPA file load (PPA binary) PASS
>
> IPPA Memory PASS
>
> EPPA file load (PPA binary) PASS
>
> EPPA Memory FAIL
>
> Native Phy 1 PASS
>
> Native Phy 2 PASS
>
> ** MIC1: ge-2-port PASS
>
> Start at 01:39:15 09/06/2012
>
> MIC Phy 1 PASS
>
> MIC Phy 2 PASS
>
> MIC Ibus Test PASS
>
> Test Failure Details:
>
> POD test. Time: 01:39:17 09/06/2012
>
> TestName: EPPA Memory, slot 2, scl 4
>
> Error: 0x1602 -> PPA_MEMTEST_FAIL
>
> Address line fail, MCT 1, line 3 stuck high
>
> POD test. Time: 01:39:17 09/06/2012
>
> TestName: EPPA Memory, slot 2, scl 4
>
> Error: 0x1602 -> PPA_MEMTEST_FAIL
>
> Address line fail, MCT 1, line 10 stuck high
>
> POD test. Time: 01:39:17 09/06/2012
>
> TestName: EPPA Memory, slot 2, scl 4
>
> Error: 0x1602 -> PPA_MEMTEST_FAIL
>
> Address line fail, MCT 1, line 1 & line 3 shorted
>
> POD test. Time: 01:39:17 09/06/2012
>
> TestName: EPPA Memory, slot 2, scl 4
>
> Error: 0x1602 -> PPA_MEMTEST_FAIL
>
> Address line fail, MCT 1, line 1 & line 10 shorted
>
> POD test. Time: 01:39:17 09/06/2012
>
> TestName: EPPA Memory, slot 2, scl 4
>
> Error: 0x1602 -> PPA_MEMTEST_FAIL
>
> Address line fail, MCT 1, line 2 & line 3 shorted
>
> POD test. Time: 01:39:17 09/06/2012
>
> TestName: EPPA Memory, slot 2, scl 4
>
> Error: 0x1602 -> PPA_MEMTEST_FAIL
>
> Address line fail, MCT 1, line 2 & line 10 shorted
>
> POD test. Time: 01:39:17 09/06/2012
>
> TestName: EPPA Memory, slot 2, scl 4
>
> Error: 0x1602 -> PPA_MEMTEST_FAIL
>
> Address line fail, MCT 1, line 3 & line 10 shorted
>
> POD test. Time: 01:39:17 09/06/2012
>
> TestName: EPPA Memory, slot 2, scl 4
>
> Error: 0x1602 -> PPA_MEMTEST_FAIL
>
> Address line fail, MCT 1, line 4 & line 3 shorted
>
> POD test. Time: 01:39:17 09/06/2012
>
> TestName: , slot 2
>
> Error: 0x1617 -> PPA_DOWNLOAD_FAIL
>
> PPA Download failed