[rbak-nsp] Failed SE100 (PPA?)

[support at ecn.net.au]

Hi All

We’ve got a SE100 that today had an issue.

It appears the card 2 has failed and I think possibly it is the PPA memory.

See below for the diag of card 2.

Does anyone have any pointers on what may be able to be done to fix this or do we now officially have a door stop?

Best Regards

Mark


show card port

Slot/Port:Ch:SubCh Type State
2/1 ethernet No card
2/2 ethernet No card
2/3 ethernet No card
2/4 ethernet No card
--------------------------------------------------------------------
Slot number : 2
Configured-type : carrier
Installed-type : carrier
Initialized : No
Card Admin State : No Shut
IPPA running : No
EPPA running : No
Card PPAs Up : No
Default Line Card : No
MIC 1 : Config: ge-2-port Install: ge-2-port
MIC 2 : Config: no MIC Install: no MIC
Chassis Entitlement : All (0x0)
Ports Entitled : All

show diag pod card 2 detail

Slot Type POD status (Enabled)

---- -------------------------------- ----------------------

2

** Carrier FAIL

Start at 01:39:12 09/06/2012

Card Type Valid PASS

EPPA SCL 3 PASS

EPPA SCL 4 PASS

IPPA SCL 5 PASS

IPPA SCL 6 PASS

Controller FPGA Interface Test PASS

Controller FPGA Register Test PASS

Verify Controller FPGA Revision in FPGA File PASS

ADM1026 Register Test PASS

ADM1026 Fan Test PASS

ADM1026 Temperature Test PASS

ADM1026 Voltage Test PASS

D3 Config Test PASS

Controller FPGA Config Test PASS

Data Path FPGA Config Test PASS

Data Path FPGA Interface Test PASS

Data Path FPGA Register Test PASS

---(more)---Sep 6 12:17:47: %LOG-6-TDM_CONS: find_log_entries_byslot() failed, rc = 6 Sep 6 12:17:47: %LOG-6-TDM_CONS: find_log_entries_byslot() failed, rc = 6

Verify Data Path FPGA Revision in FPGA File PASS

IPPA file load (PPA binary) PASS

IPPA Memory PASS

EPPA file load (PPA binary) PASS

EPPA Memory FAIL

Native Phy 1 PASS

Native Phy 2 PASS

** MIC1: ge-2-port PASS

Start at 01:39:15 09/06/2012

MIC Phy 1 PASS

MIC Phy 2 PASS

MIC Ibus Test PASS

Test Failure Details:

POD test. Time: 01:39:17 09/06/2012

TestName: EPPA Memory, slot 2, scl 4

Error: 0x1602 -> PPA_MEMTEST_FAIL

Address line fail, MCT 1, line 3 stuck high

POD test. Time: 01:39:17 09/06/2012

TestName: EPPA Memory, slot 2, scl 4

Error: 0x1602 -> PPA_MEMTEST_FAIL

Address line fail, MCT 1, line 10 stuck high

POD test. Time: 01:39:17 09/06/2012

TestName: EPPA Memory, slot 2, scl 4

Error: 0x1602 -> PPA_MEMTEST_FAIL

Address line fail, MCT 1, line 1 & line 3 shorted

POD test. Time: 01:39:17 09/06/2012

TestName: EPPA Memory, slot 2, scl 4

Error: 0x1602 -> PPA_MEMTEST_FAIL

Address line fail, MCT 1, line 1 & line 10 shorted

POD test. Time: 01:39:17 09/06/2012

TestName: EPPA Memory, slot 2, scl 4

Error: 0x1602 -> PPA_MEMTEST_FAIL

Address line fail, MCT 1, line 2 & line 3 shorted

POD test. Time: 01:39:17 09/06/2012

TestName: EPPA Memory, slot 2, scl 4

Error: 0x1602 -> PPA_MEMTEST_FAIL

Address line fail, MCT 1, line 2 & line 10 shorted

POD test. Time: 01:39:17 09/06/2012

TestName: EPPA Memory, slot 2, scl 4

Error: 0x1602 -> PPA_MEMTEST_FAIL

Address line fail, MCT 1, line 3 & line 10 shorted

POD test. Time: 01:39:17 09/06/2012

TestName: EPPA Memory, slot 2, scl 4

Error: 0x1602 -> PPA_MEMTEST_FAIL

Address line fail, MCT 1, line 4 & line 3 shorted

POD test. Time: 01:39:17 09/06/2012

TestName: , slot 2

Error: 0x1617 -> PPA_DOWNLOAD_FAIL

PPA Download failed
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20120906/d9ab008b/attachment.html>