[rbak-nsp] Active user with IP address

[Соловьёв Роман]

on SE100 i do it so
show subscribers active | begin before 9 after 1 "ip address" | exclude 
Circuit | exclude Session | exclude Interface | exclude Current | exclude 
Protocol | exclude bind | exclude profile | exclude dns | grep LOGIN


В сообщении от Tuesday 04 September 2012 19:14:01 Judith Sanders написал(а):
> Is there a command to determine what user is using a particular IP address
> in the Redback SE800? I know about the sh sub active ...etc. but I want to
> see if I can type in an IP address from our pool and it tells me what user
> is assigned to this.
> We can use our Radius to track down this information just wondered if it is
> applicable on the SE itself?
>
> Judith Sanders
> Pioneer Telephone
> Inside Plant Networking Services
> jasanders at ptci.com<mailto:jasanders at ptci.com> 405.375.0645
> "Think and wonder, wonder and think."
> Dr. Seuss<http://www.goodreads.com/author/show/61105.Dr_Seuss>
>
>
>
>
>
> ***************************
> This email message and any files transmitted with it are intended solely
> for the use of the individual or entity  for whom it is addressed.  It
> may contain confidential and privileged information. If you are not the
> intended recipient, please contact the sender and destroy all paper and
> electronic copies of this message and its contents.  Any unauthorized
> review, use, disclosure or distribution of this email or any file
> attachments is strictly prohibited.



-- 
С уважением Соловьёв Роман
Технический директор
ООО "СерДи ТелеКом"

тел.	+7 87951 35588 доб 113
	+7 87951 35529
	+7 903 4175575
Сайт компании
www.serdi.ru