[rbak-nsp] SE-100 to Cisco EtherChannel.

[Larry Jones]

There are 3 types of link-groups in SEOS, ether, access and dot1q.

conf
link-group LG1 ether
bind int xxxx
lacp active
!or
link-group LG2 access
encap dot1q
dot1q pvc xxx
lacp active
!
link-group LG3 dot1q
encap dot1q
dot1q pvc xxx
lacp active
!
port eth x1/y1
link-group LG1
!
port eth x2/y2
enca dot1q
link-group LG2
!
port eth x3/y3
encap dot1q
link-group LG2
end

From: redback-nsp-bounces at puck.nether.net [mailto:redback-nsp-bounces at puck.nether.net] On Behalf Of Jarek Jarzebowski
Sent: Sunday, January 20, 2013 12:21 PM
To: redback-nsp at puck.nether.net
Subject: [rbak-nsp] SE-100 to Cisco EtherChannel.

Hi all,
I plan to set up en etherchannel 2x1G between SE-100 and Cisco Catalyst 6500. Have you got any hints on this? Is it a good or bad idea? Maybe the better choice is to leave etherchannels and stay on standalone ports?
Have anybody practice in configuring etherchannels on SE-100 at all?
Regards,
Jarek
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20130121/3f8b170d/attachment.html>