[rbak-nsp] SNMP - reading interface apd dot.1q stats

[Jim Tyrrell]

I think you might need to enable the enhanced mib:

snmp server enhance ifmib

Then you should have info like:

IF-MIB::ifDescr.134217796 = STRING: port ethernet 1/1 dot1q pvc 1609 1/2/68
IF-MIB::ifDescr.134217797 = STRING: port ethernet 1/1 dot1q pvc 1611 1/2/69
IF-MIB::ifDescr.134217805 = STRING: port ethernet 1/4 dot1q pvc 2009 1/2/77
IF-MIB::ifDescr.134217807 = STRING: port ethernet 1/4 dot1q pvc 2109 1/2/79

Jim.

On 20/06/2013 14:24, "Kuba" Dawid Chrzan wrote:
> Hi,
> how to read interface statistics from SE100?
>
> When i run snmpwalk i receive a lot of data
>
> from such a view
> snmp view Inet-View internet
>
> But i am not able to find anything that is applicable to my vlans
>
> Is this a matter of proper view ?
>
> snmpwalking on 1.3.6.1.2.1.2 - shows me some interface data - but i am 
> not able to find my vlans there.
>
>
> I would like to get stats form vlans - like
>
> Redback#sh circuit counters 2/2 vlan-id 2899
> Circuit                               Packets/Bytes Sent Packets/Bytes 
> Received
> 2/2 vlan-id 2899 1333404294             1965185909
>                                             230419119236 2236219321036
>
>