[rbak-nsp] Access-Link-group utilization
beni at f1-corner.de
beni at f1-corner.de
Fri Jun 21 08:42:09 EDT 2013
Link-Group: SWITCH-1, ID : 25, State : Up
------------------------------------------------------------------------------
Ccct count : 4 Grouping : LoadShare
Card Type : ge-10-port Type : access
Bindings : Unbound Minimum-links : 1
Maximum-links : 8
Prot-Group-Type : round-robin
Internal Handle : 255/22:1:26/1/1/12287
Description : ###
Constituent Circuits:
1. 1/5 (Up )| 48.12%
2. 1/8 (Up )| 31.78%
3. 2/8 (Up )| 54.31%
4. 3/8 (Up )| 34.24%
Link-Group: SWITCH-2, ID : 26, State : Up
------------------------------------------------------------------------------
Ccct count : 4 Grouping : LoadShare
Card Type : ge-10-port Type : access
Bindings : Unbound Minimum-links : 1
Maximum-links : 8
Prot-Group-Type : round-robin
Internal Handle : 255/22:1:27/1/1/12447
Description : ###
Constituent Circuits:
1. 1/10 (Up )| 38.60%
2. 2/5 (Up )| 44.55%
3. 2/10 (Up )| 30.48%
4. 3/10 (Up )| 38.93%
sh lacp actor
Port Port Oper Recv Seln
Lg-id Port State Priority key State State
----------------------------------------------------------------------
25 1/5 0x3f 32767 25 exchg active
25 1/8 0x3f 32767 25 exchg active
25 2/8 0x3f 32767 25 exchg active
25 3/8 0x3f 32767 25 exchg active
26 1/10 0x3f 32767 26 exchg active
26 2/5 0x3f 32767 26 exchg active
26 2/10 0x3f 32767 26 exchg active
26 3/10 0x3f 32767 26 exchg active
Summary: 2x 4 GE Ports per LG, as you can see, the traffic is not balanced...
> post the output from:
> show link-group
> show lacp actors
More information about the redback-nsp
mailing list