[rbak-nsp] Rate limit

[Łukasz Sierżęga]

Metering just drops every traffic beyond configured level.

If you want queue them, you should use one of the queue types like pwfq, mdrr.

Dnia wtorek, 28 maja 2013 22:39:33 Golem pisze:
> Hello
> 
> I'm try to setup simple rate limit:
> !
> qos policy 001280-out metering
>  rate 10240 burst 1920000 excess-burst 38400000
>  rate-calculation exclude layer-2-overhead
> !
> Policy is applied via radius reply for Clips circuit.
> Problem   is when excess-burst is reached traffic becomes very choppy,
> packet  loss  occurs  under  high load, traffic seems jumping 6-15Mbit
> resulting average 10Mbit. Before excess burst is
> reached we have burst start and then flat 10Mbit rate.
> Where is problem and how to deal with it ?
> Thanks for any help

------
Pozdrawiam 

Łukasz Sierżęga
Administrator

Tomków Sp. z o.o.
 
tel.: 756 455 310
email: lukasz.sierzega at tomkow.pl
www.tomkow.pl 

Spółka zarejestrowana w Sądzie Rejonowym dla Wrocławia Fabrycznej IX Wydział 
Gospodarczy Krajowego Rejestru Sądowego pod numerem KRS 0000199590; 
Kapitał zakładowy 108.000 PLN 
NIP 615-189-42-92 
REGON 231198374