[rbak-nsp] Upgrade to SEOS 6.4.1.3

[Sokvantha YOUK]

Dear All,

I am trying to upgrade SE100 from SEOS-6.1.5.1 to SEOS-6.4.1.3. I have
strange problem that once I run release download, it runs never end.
May you advice me what was the problem? What may I done wrong?

This is my show version output:
Redback Networks SmartEdge OS Version SEOS-6.1.5.1-Release
Built by sysbuild at SWB-node14 Fri May 29 15:36:35 PDT 2009
Copyright (C) 1998-2009, Redback Networks Inc. All rights reserved.
System Bootstrap version is PowerPC,rev2.0.1.4
Installed minikernel version is 2.7

I am upgrading to version 6.4.1.3 as below output. Beside, I got error
at creating remote directory failed as you may see it in following
output.

Router Up Time -   1 hour 29 minutes 42 secs
Remote system type is UNIX.
Using binary mode to transfer files.
200 Type set to I.
250 CWD command successful.
remote: SEOS-mips-6.4.1.3.tar.gz
229 Entering Extended Passive Mode (|||62489|)
150 Opening BINARY mode data connection for 'SEOS-mips-6.4.1.3.tar.gz'
(120692550 bytes).
Sep 24 12:50:25.277: %DLM-3-INVALID_TAG: Invalid information tag FLAG
Sep 24 12:50:25.763: %DLM-3-GENERAL_ERR: Cannot create directory:
/ata0/p02/usr/siara/bin/, remote mkdir failed.

Please advice me what I have missed?

-- 
Regards,
Vantha