[rbak-nsp] Compact flash alarm

[Ray]

I have just booted an SE800 chassis with a new (used) XCRP4 processor 
and I'm seeing an alarm for the XCRP Compact Flash:

[local]redback#show diag pod card 7 detail

Slot Type                                                 POD Status 
(Enabled)
---- -------------------------------- ----------------------
7 xcrp4-base FAIL
      Env    Type/Loop           Test Name String
      BCMSFW   POD 1  BCM lower short DRAM                         PASS
      BCMSFW   POD 1  Triton Download                              PASS
      BCMSFW   POD 1  ID EEPROM                                    PASS
      BCMSFW   POD 1  Chassis MAC Address                          PASS
      BCMSFW   POD 1  SMM665 Display                               PASS
      BCMSFW   POD 1  ADT7461 Display                              PASS
      BCMSFW   POD 1  Compact Flash Access                         FAIL

Test Failure Details:
BCMSFW   POD 1  Compact Flash Access :  Compact Flash ATA command error 
: CF-X error 0xfffff2df following ata cmd 145 2013/09/12 17:42:08

I'm not on site so I asked remote hands to pull out the XCRP4 to re-seat 
the internal compact flash, but they tell me it doesn't have one 
installed, which confuses me as 'show disk' showed an internal card:

#show disk
Location  512-blocks     Used    Avail Capacity  Mounted on
Internal     1940606    452352   1391224    24%    /
External     1021244    182120    788062    18%    /md

Is the Internal disk something else, or are the onsite engineers looking 
at the wrong thing?

Thanks.

Ray.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20130912/0e9c8ec7/attachment.html>