[rbak-nsp] OSPF

[Brandon Leeberg]

The highlighted area below, from your config, is where I see 0.0.0.0



   --- OSPF Neighbors for Instance 1/Router ID 10.255.255.5 ---



NeighborID      NeighborAddress Pri State    DR-State IntfAddress     TimeLeft

10.255.255.12         10.0.1.9               128 Full     Other           10.0.1.10             34



Brandon



-----Original Message-----
From: redback-nsp [mailto:redback-nsp-bounces at puck.nether.net] On Behalf Of Maciej Hiller
Sent: Thursday, August 28, 2014 3:33 PM
To: redback-nsp at puck.nether.net
Subject: Re: [rbak-nsp] OSPF



have you got set the router-id ?

(config-ospf)#router-id 10.255.255.5



if not, ospf take the ID from ip address on loopback interface

0.0.0.0 looks like area id :)



try to set router-id



Maciej



W dniu 2014-08-29 00:10, Brandon Leeberg napisał(a):

> I have it set up correctly, based on the config you sent me (THANK

> YOU!), but for some reason, the OSPF neighbor state is reporting as

> DOWN. It lists the neighbor's IP address, but for the neighbor ID, it

> reports as 0.0.0.0

>

> Any idea why?

>

> Thanks!

>

> Brandon

>

> -----Original Message-----

> From: redback-nsp [mailto:redback-nsp-bounces at puck.nether.net] On

> Behalf Of Maciej Hiller

> Sent: Thursday, August 28, 2014 1:08 PM

> To: redback-nsp at puck.nether.net<mailto:redback-nsp at puck.nether.net>

> Subject: Re: [rbak-nsp] OSPF

>

> Hi Brandon

>

> it is working config

>

> #sh conf cont local

> Building configuration...

>

> Current configuration:

> !

> context local

> !

>   no ip domain-lookup

> !

>   interface TO-RTR-A p2p

>    ip address 10.0.1.14/30

>    ip mtu 9170

> !

>   interface TO-RTR-B p2p

>    ip address 10.0.1.10/30

>    ip mtu 9170

> !

>   interface lo loopback

>    ip address 10.255.255.5/32

> !

>   router ospf 1

>    area 0.0.0.0

>     interface lo

>      passive

>     interface 10.0.1.10

>      authentication md5 OSPF-AUTH-KEY1

>     interface 10.0.1.14

>      authentication md5 OSPF-AUTH-KEY1 !

>   key-chain OSPF-AUTH-KEY1 key-id 1

>    key-string encrypted ************************** !

>   router mpls

>    interface TO-RTR-A

>    interface TO-RTR-B

> !

>   router ldp

>    interface TO-RTR-A

>    interface TO-RTR-B

>    interface lo

> !

>

> #sh ospf nei

>

>    --- OSPF Neighbors for Instance 1/Router ID 10.255.255.5 ---

>

> NeighborID      NeighborAddress Pri State    DR-State IntfAddress

> TimeLeft

> 10.255.255.12   10.0.1.9        128 Full     Other    10.0.1.10

> 34

> 10.255.255.10   10.0.1.13       128 Full     Other    10.0.1.14

> 35

>

> #sh ldp nei

> PeerFlags: A - LocalActiveOpen, D - Deleted, R - Reseting, E -

> OpenExtraDelay

>             N - OpenNoDelay, P - SetMD5Passwd, T - RetainRoute, F -

> FlushState

>             X - ExplicitNullEnabled, C - ExplicitNullStatusChanging

>             G - Graceful Restart Supported, L - Session Life Extended

>             * - Reachable via RSVP-TE LSP , U - Unrecognized

> Notification Capable

>             V - Reachable Via Tunnel-Shortcut , W - Typed wildcard FEC

> capable SHld - Session Holdtime Left, HHld - Hello Holdtime Left

>

> NeighborAddr    LDP Identifier        State   Flag    SHld HHld

> Interface

> 10.255.255.10   10.255.255.10:0       Oper    G       20   14

> TO-RTR-A

> 10.255.255.12   10.255.255.12:0       Oper    G       20   10

> TO-RTR-B

>

> Regards,

>

> Maciej

>

> W dniu 2014-08-28 19:09, Brandon Leeberg napisał(a):

>> Forgive me in advance, as I am a redback novice.

>>

>> What we are trying to do is create an MPLS circuit between two

>> redback routers (SEOS 11.1.2.5p2). Local contexts are already

>> connected, and I believe I have the MPLS and PW config down, but I am

>> having a heck of a time configuring OSPF. I have a loopback on each

>> of the two routers (local contexts), and every config I have tried

>> has failed to bring up an OSPF neighbor connection. LDP connection

>> came up between the two without any issue.  Can someone provide some

>> configuration examples for connecting router 1 (loopback

>> 10.255.255.1) to router 2

>> (10.255.255.2) via OSPF?

>>

>> Any assistance is much appreciated!

>>

>> Brandon

>>

>> _______________________________________________

>> redback-nsp mailing list

>> redback-nsp at puck.nether.net<mailto:redback-nsp at puck.nether.net>

>> https://puck.nether.net/mailman/listinfo/redback-nsp

> _______________________________________________

> redback-nsp mailing list

> redback-nsp at puck.nether.net<mailto:redback-nsp at puck.nether.net>

> https://puck.nether.net/mailman/listinfo/redback-nsp

_______________________________________________

redback-nsp mailing list

redback-nsp at puck.nether.net<mailto:redback-nsp at puck.nether.net>

https://puck.nether.net/mailman/listinfo/redback-nsp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20140828/f3ff5ba3/attachment-0001.html>