[rbak-nsp] se100 vrrp

[Шепелев Андрей]

i configured vrrp on two se100 box as follows


first se100
!
 interface l2tp_con
  ip address 10.255.252.2/29
  vrrp 1 owner
   virtual-address 10.255.252.2
!

!
link-group subs access economical
 encapsulation dot1q
 qos pwfq scheduling physical-port
 dot1q pvc 999
  bind interface l2tp_con local
 dot1q pvc 4092
  bind interface test local
!

second se100

!
 interface l2tp_con
  ip address 10.255.252.3/24
  vrrp 1 backup
   virtual-address 10.255.252.2
!

!
link-group subs access economical
 encapsulation dot1q
 qos pwfq scheduling physical-port
 dot1q pvc 999
  bind interface l2tp_con local
 dot1q pvc 4092
  bind interface test local
!

and i can not ping any adress and there is no traffic.

if i delete vrrp config all pings go fine.

[local]Redback#sh vrrp


  --- VRRP Virtual Router l2tp_con/1 (Backup) ---

State             : Backup            Last Event        : Interface Up
Priority          : 100               Advertise Int     : 1
Last Adv Source   : 10.255.252.2      Up Time           : 00:33:21
Preempt           : Yes               Master Down Int   : 3
Preempt HT (sec)  : 0                 Skew Time (u-sec) : 609375
Auth Type:        : None              Key Chain         :
Connected Route   : No
Address List:
10.255.252.2
[local]Redback#


[local]Redback#sh vrrp


  --- VRRP Virtual Router l2tp_con/1 (Owner) ---

State             : Master            Last Event        : Interface Up
Priority          : 255               Advertise Int     : 1
Last Adv Source   : 0.0.0.0           Up Time           : 00:39:21
Auth Type:        : None              Key Chain         :
Address List:
10.255.252.2
[local]Redback#


are there any bug? i forgot somthing ? or may be vrrp does not work on se
routers?????
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20140531/36d94991/attachment.html>