[rbak-nsp] tarnsit traffic policing (CLIPS? dot1q subscriber?)

[Sergey Stepanchuk]

 Hello Andrey,

Thanks for the answer

Could you plese give me a link where I can read more about configuring h-qos on redback or show me few  examples?




Fri, 31 Oct 2014 09:09:18 +0600 от Шепелев Андрей <xamalon4eg at gmail.com>:
>May be you can use shaping on the port using H-QOS polices like PWFQ or so?
>
>2014-10-29 22:14 GMT+06:00 Sergey Stepanchuk  < stepanchuk13 at list.ru > :
>>Dear Colleagues,
>>
>>Could please anyone help me to find a way for policing tarnsit traffic on redback (SE100) ?
>>
>>Most of our customers have /29 subnets, these subnets are L3 routed to SE100, so we have to policy /29 adress space as a single cutomer and tariff bandwith (lets say 10Mbit) should be shared among all IPs in /29.
>>But L3 non-dhcp-clips support only /32 subscribers, and in this case each IP of /29 pool will be bind as a single customer with 10Mbit rate.
>>As I know, the dot1q subs can be helpfull , but it requires L2 connectivity between the redback and the enduser.
>>
>>Is there any other ways to policy transit traffic?
>>
>>Thanks.
>>
>>
>>-- 
>>Sergey Stepanchuk
>>_______________________________________________
>>redback-nsp mailing list
>>redback-nsp at puck.nether.net
>>https://puck.nether.net/mailman/listinfo/redback-nsp
>>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20141031/fc85ae3f/attachment.html>