[rbak-nsp] tarnsit traffic policing (CLIPS? dot1q subscriber?)

[Шепелев Андрей]

hi!

so you can get documents
http://data.nag.ru/Ericsson%20SmartEdge%20%28Redback%29/Manuals/12.1.1.5/

also recommend you to install
http://data.nag.ru/Ericsson%20SmartEdge%20%28Redback%29/Manuals/install_15_0_IE11.exe
and use Alex format. there you can get very user friendly interface and
serach engine.


2014-10-31 16:15 GMT+06:00 Sergey Stepanchuk <stepanchuk13 at list.ru>:

> Hello Andrey,
>
> Thanks for the answer
>
> Could you plese give me a link where I can read more about configuring
> h-qos on redback or show me few  examples?
>
>
>
>
> Fri, 31 Oct 2014 09:09:18 +0600 от Шепелев Андрей <xamalon4eg at gmail.com>:
>
>   May be you can use shaping on the port using H-QOS polices like PWFQ or
> so?
>
> 2014-10-29 22:14 GMT+06:00 Sergey Stepanchuk <stepanchuk13 at list.ru
> <https://e.mail.ru/compose/?mailto=mailto%3astepanchuk13@list.ru>>:
>
> Dear Colleagues,
>
> Could please anyone help me to find a way for policing tarnsit traffic on
> redback (SE100) ?
>
> Most of our customers have /29 subnets, these subnets are L3 routed to
> SE100, so we have to policy /29 adress space as a single cutomer and tariff
> bandwith (lets say 10Mbit) should be shared among all IPs in /29.
> But L3 non-dhcp-clips support only /32 subscribers, and in this case each
> IP of /29 pool will be bind as a single customer with 10Mbit rate.
> As I know, the dot1q subs can be helpfull , but it requires L2
> connectivity between the redback and the enduser.
>
> Is there any other ways to policy transit traffic?
>
> Thanks.
>
>
> --
> Sergey Stepanchuk
>
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> <https://e.mail.ru/compose/?mailto=mailto%3aredback%2dnsp@puck.nether.net>
> https://puck.nether.net/mailman/listinfo/redback-nsp
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20141031/c9625b7d/attachment.html>