[rbak-nsp] maximum-links must be 2 for access type link-group with current PPA card

Łukasz Kopiszka lukasz at alfa-system.pl
Wed Apr 15 02:48:47 EDT 2015



W dniu 14.04.2015 o 18:12, Tomas Lynch pisze:
> Have you committed the change of maximum links before assigning a new
> port to the link group?
Yes.


>
> On Tue, Apr 14, 2015 at 12:35 AM, Łukasz Kopiszka <lukasz at alfa-system.pl> wrote:
>> Working example only for maximum-links=2:
>>
>> link-group test access
>>   encapsulation dot1q
>>   maximum-links 2
>>   lacp active
>>   dot1q pvc 123
>>    service clips dhcp context CLIPS
>>
>> port ethernet 2/1
>>   no shutdown
>>   encapsulation dot1q
>>   link-group-test
>>
>>
>> Problem occurs if I want increase maximum-links=3:
>>
>> link-group test access
>>   encapsulation dot1q
>>   maximum-links 3
>>   lacp active
>>   dot1q pvc 123
>>    service clips dhcp context CLIPS
>>
>> port ethernet 2/1
>>   no shutdown
>>   encapsulation dot1q
>>
>>
>> When I try assign link-group "link-group-test" I got error:
>> % maximum-links must be 2 for access type link-group with current PPA card
>>
>> Any solution how to fix it?
>>
>> Problem is on SE100 with SEOS 6... and SE600 with SEOS 12...
>>
>> --
>> Pozdrawiam,
>> Łukasz Kopiszka
>> www.alfa-system.pl
>>
>> _______________________________________________
>> redback-nsp mailing list
>> redback-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/redback-nsp

-- 
Pozdrawiam,
Łukasz Kopiszka
www.alfa-system.pl



More information about the redback-nsp mailing list