[rbak-nsp] Bad CF ?

Rafal golem at mtm-info.pl
Mon Jun 1 04:28:06 EDT 2015


Hello ,

I have noticed spam of these errors in log:

  Jun 1 03:34:44: %SYSLOG-2-CRIT: /netbsd: HARD ERROR: retry failed, switch-over if applicable
Jun 1 03:34:44: %SYSLOG-2-CRIT: /netbsd: wd2a: 0x0, writing fsbn, st=0x58, er=0x00
Jun 1 03:34:45: %SYSLOG-0-EMERG: /netbsd: drive failures: STANDBY_NOT_READY to switch-over
Jun 1 03:34:45: %SYSLOG-2-CRIT: /netbsd: wdc2:0:0: lost interrupt
Jun 1 03:34:45: %SYSLOG-2-CRIT: /netbsd:        type: ata tc_bcount: 14848 tc_skip: 1536
Jun 1 03:34:45: %SYSLOG-3-ERR: /netbsd: st=0x58, er=0x00
Jun 1 03:34:45: %SYSLOG-2-CRIT: /netbsd: wd2a: device timeout writing fsbn 99 of 96-127 (wd2 bn 99; cn 0 tn 1 sn 36)
Jun 1 03:34:45: %SYSLOG-3-ERR: /netbsd: SOFT ERROR: after a reset, retrying 0
Jun 1 03:34:47: %SYSLOG-2-CRIT: /netbsd: wdc2:0:0: lost interrupt
Jun 1 03:34:47: %SYSLOG-2-CRIT: /netbsd:        type: ata tc_bcount: 14848 tc_skip: 1536
Jun 1 03:34:47: %SYSLOG-3-ERR: /netbsd: st=0x58, er=0x00
Jun 1 03:34:47: %SYSLOG-2-CRIT: /netbsd: wd2a: device timeout writing fsbn 99 of 96-127 (wd2 bn 99; cn 0 tn 1 sn 36)
Jun 1 03:34:48: %SYSLOG-3-ERR: /netbsd: SOFT ERROR: after a reset, retrying 1



This is Compact Flash failure ?


--


Best regards,
 Ozga Rafal                          mailto:golem at mtm-info.pl



More information about the redback-nsp mailing list