[rbak-nsp] Does SE600 supports XCRP4 with SEOS 11.x.x.x

[Шепелев Андрей]

Can you show your redback.cfg ?

2015-09-11 13:49 GMT+05:00 Muni Raj <p.muniraj at gmail.com>:

> HI ,
>
> We just Migrated the XCRP3 to XCRP4 in SE600 with 12.1.1.9.. We have
> loaded the same redback.cfg of old node into the new one... But
> Unfortunately, the PPPoE Subscribers were not able to come up and the
> session stucked upat Protocol Not set...
>
>
> We suspect that the IPv4 Protocol is not set in session ...
>
>
> Kinldy suugest if any solutions...
>
> On Fri, Jun 6, 2014 at 1:53 PM, Marcin Kuczera <marcin at leon.pl> wrote:
>
>> On 2014-06-06 09:04, Muni Raj wrote:
>>
>>
>> HI , We are planning to upgrade the system from xcrp3 to xcrp4 in se600
>> so does se600 can have xcrp4 with 11.x.x.x
>>
>>
>> Yes it does, but you must have separate image, mips based.
>>
>> Regards,
>> Marcin
>>
>>
>>
>> --
>> Regards
>>
>> P.Muniraj
>>
>>
>>
>> <http://www.hcl.in>
>>
>>
>> _______________________________________________
>> redback-nsp mailing listredback-nsp at puck.nether.nethttps://puck.nether.net/mailman/listinfo/redback-nsp
>>
>>
>>
>> _______________________________________________
>> redback-nsp mailing list
>> redback-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/redback-nsp
>>
>>
>
>
> --
> Regards
>
> P.Muniraj
>
>
>
> <http://www.hcl.in> <http://www.hclinfosystems.in/email-disclaimer.htm>
>
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20150918/a4f6440e/attachment.html>