[rbak-nsp] se800 ge-4-port card not working
Eng.Nawras Chahbandar
nawras.chahbandar at gmail.com
Thu Sep 22 03:57:34 EDT 2016
Hi There,
I have a similar problem at se800 for ge-4-port card. Card isn’t working. I
saw the log “Chass Entitlement : SE400 (0x4)” what does mean?
I know se400 and se800 same chassies. But the card not working. I can try
to “reload fpga 5” see the log “FPGA programming verification failure” What
does mean?
What can I do?
PS: I haven’t got a services contract at the ericsson.
[local]Redback#sh hardware card 5 detail
Slot : 5 Type : ge-4-port
Serial No : 8K50xxxxxxxxxx Hardware Rev : 50
EEPROM id/ver : 0x5a/4 Mfg Date : 13-APR-2005
SysFpga rev : 0x0 SysFpga file rev : N/A
LimFpga rev : 0x0 LimFpga file rev : N/A
FlipFpga rev : 0x0 FlipFpga file rev : N/A
IPPA memory : N/A EPPA memory : N/A
Voltage : N/A Temperature : N/A
Card Status : HW failure POD Status : Success
Card State : FPGA programming verification failure
ODD Status : Not Available
Fail LED : Invalid Active LED : Invalid
Standby LED : Invalid
Chass Entitlement : SE400 (0x4)
Ports Entitled : 1, 3
Active Alarms : N/A
[local]Redback#
Other logs are below.
[local]Redback#sh ver
Redback Networks SmartEdge OS Version SEOS-6.1.5.7-Release
Built by sysbuild at SWB-node13 Fri Nov 19 10:30:08 PST 2010
Copyright (C) 1998-2010, Redback Networks Inc. All rights reserved.
System Bootstrap version is PowerPC,1.0b1272
Installed minikernel version is 23
Router Up Time - 4 days, 10 hours 43 minutes 31 secs
[local]Redback#
[local]Redback#sh hardware card 5
Slot Type Serial No Rev Ver Mfg Date Voltage Temp
---- -------------------- -------------- ---- --- ----------- --------
-------
5 ge-4-port 8K50xxxxxxxxxx 50 4 13-APR-2005 N/A N/A
[local]Redback#sh hardware card 5 detail
Slot : 5 Type : ge-4-port
Serial No : 8K50xxxxxxxxxx Hardware Rev : 50
EEPROM id/ver : 0x5a/4 Mfg Date : 13-APR-2005
SysFpga rev : 0x0 SysFpga file rev : N/A
LimFpga rev : 0x0 LimFpga file rev : N/A
FlipFpga rev : 0x0 FlipFpga file rev : N/A
IPPA memory : N/A EPPA memory : N/A
Voltage : N/A Temperature : N/A
Card Status : HW detected POD Status : Success
ODD Status : Not Available
Fail LED : Invalid Active LED : Invalid
Standby LED : Invalid
Chass Entitlement : SE400 (0x4)
Ports Entitled : 1, 3
Active Alarms : N/A
[local]Redback#
[local]Redback#sh hardware card 4
Slot Type Serial No Rev Ver Mfg Date Voltage Temp
---- -------------------- -------------- ---- --- ----------- --------
-------
4 ge-4-port 8K03xxxxxxxxxxx 03 4 06-MAY-2003 OK
NORMAL
[local]Redback#sh hardware card 4 detail
Slot : 4 Type : ge-4-port
Serial No : 8K03xxxxxxxxxxx Hardware Rev : 03
EEPROM id/ver : 0x5a/4 Mfg Date : 06-MAY-2003
SysFpga rev : 0x7 SysFpga file rev : N/A
LimFpga rev : 0x5 LimFpga file rev : 0x5
FlipFpga rev : 0xc FlipFpga file rev : 0xc
IPPA memory : 256 MB EPPA memory : 256 MB
Voltage 1.500V : 1.514 (+1%) Voltage 1.800V : 1.770 (-2%)
Voltage 2.625V : 2.627 (+0%) Voltage 3.400V : 3.394 (-0%)
Temperature : NORMAL (41 C)
Card Status : HW initialized POD Status : Success
ODD Status : Not Available
Fail LED : Off Active LED : On
Standby LED : Invalid
Chass Entitlement : All (0x0)
Ports Entitled : All
Active Alarms : NONE
[local]Redback#
Best regards
Eng. Nawras Chahbandar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20160922/c2a00c6b/attachment.html>
More information about the redback-nsp
mailing list