[rbak-nsp] se800 ge-4-port card not working

[Marcin Kuczera]

On 2016-09-22 09:57, Eng.Nawras Chahbandar wrote:
>
> Hi There,
>
>  
>
> I have a similar problem at se800 for ge-4-port card. Card isn’t
> working. I saw the log “Chass Entitlement   : SE400 (0x4)” what does mean?
>
>  
>
> I know se400 and se800 same chassies. But the card not working. I can
> try to “reload fpga 5” see the log “FPGA programming verification
> failure” What does mean?
>
>  
>
> What can I do?
>

show diag pod card 5 detail
or sth like that.

Marcin


>  
>
> PS: I haven’t got a services contract at the ericsson.
>
>  
>
> [local]Redback#sh hardware card 5 detail
>
>  
>
> Slot                : 5                 Type                : ge-4-port
>
> Serial No           : 8K50xxxxxxxxxx    Hardware Rev        : 50
>
> EEPROM id/ver       : 0x5a/4            Mfg Date            : 13-APR-2005
>
> SysFpga rev         : 0x0               SysFpga file rev    : N/A
>
> LimFpga rev         : 0x0               LimFpga file rev    : N/A
>
> FlipFpga rev        : 0x0               FlipFpga file rev   : N/A
>
> IPPA memory         : N/A               EPPA memory         : N/A
>
> Voltage             : N/A               Temperature         : N/A
>
> Card Status         : HW failure        POD Status          : Success
>
> Card State          : FPGA programming verification failure
>
> ODD Status          : Not Available
>
> Fail LED            : Invalid           Active LED          : Invalid
>
> Standby LED         : Invalid
>
> Chass Entitlement   : SE400 (0x4)
>
> Ports Entitled      : 1, 3
>
> Active Alarms       : N/A
>
>  
>
> [local]Redback#
>
>  
>
> Other logs are below.
>
>  
>
> [local]Redback#sh ver
>
>  
>
> Redback Networks SmartEdge OS Version SEOS-6.1.5.7-Release
>
> Built by sysbuild at SWB-node13 Fri Nov 19 10:30:08 PST 2010
>
> Copyright (C) 1998-2010, Redback Networks Inc. All rights reserved.
>
> System Bootstrap version is PowerPC,1.0b1272
>
> Installed minikernel version is 23
>
> Router Up Time -   4 days, 10 hours 43 minutes 31 secs
>
> [local]Redback#
>
>  
>
> [local]Redback#sh hardware card 5
>
>  
>
> Slot Type                 Serial No      Rev  Ver Mfg Date    Voltage 
> Temp
>
> ---- -------------------- -------------- ---- --- ----------- --------
> -------
>
> 5    ge-4-port            8K50xxxxxxxxxx    50   4 13-APR-2005
> N/A      N/A
>
>  
>
> [local]Redback#sh hardware card 5 detail
>
>  
>
> Slot                : 5                 Type                : ge-4-port
>
> Serial No           : 8K50xxxxxxxxxx    Hardware Rev        : 50
>
> EEPROM id/ver       : 0x5a/4            Mfg Date            : 13-APR-2005
>
> SysFpga rev         : 0x0               SysFpga file rev    : N/A
>
> LimFpga rev         : 0x0               LimFpga file rev    : N/A
>
> FlipFpga rev        : 0x0               FlipFpga file rev   : N/A
>
> IPPA memory         : N/A               EPPA memory         : N/A
>
> Voltage             : N/A               Temperature         : N/A
>
> Card Status         : HW detected       POD Status          : Success
>
> ODD Status          : Not Available
>
> Fail LED            : Invalid           Active LED          : Invalid
>
> Standby LED         : Invalid
>
> Chass Entitlement   : SE400 (0x4)
>
> Ports Entitled      : 1, 3
>
> Active Alarms       : N/A
>
>  
>
> [local]Redback#
>
>  
>
> [local]Redback#sh hardware card 4
>
>  
>
> Slot Type                 Serial No      Rev  Ver Mfg Date    Voltage 
> Temp
>
> ---- -------------------- -------------- ---- --- ----------- --------
> -------
>
> 4    ge-4-port            8K03xxxxxxxxxxx   03   4 06-MAY-2003
> OK       NORMAL
>
>  
>
> [local]Redback#sh hardware card 4 detail
>
>  
>
> Slot                : 4                 Type                : ge-4-port
>
> Serial No           : 8K03xxxxxxxxxxx   Hardware Rev        : 03
>
> EEPROM id/ver       : 0x5a/4            Mfg Date            : 06-MAY-2003
>
> SysFpga rev         : 0x7               SysFpga file rev    : N/A
>
> LimFpga rev         : 0x5               LimFpga file rev    : 0x5
>
> FlipFpga rev        : 0xc               FlipFpga file rev   : 0xc
>
> IPPA memory         : 256 MB            EPPA memory         : 256 MB
>
> Voltage 1.500V      : 1.514 (+1%)       Voltage 1.800V      : 1.770 (-2%)
>
> Voltage 2.625V      : 2.627 (+0%)       Voltage 3.400V      : 3.394 (-0%)
>
> Temperature         : NORMAL (41 C)
>
> Card Status         : HW initialized    POD Status          : Success
>
> ODD Status          : Not Available
>
> Fail LED            : Off               Active LED          : On
>
> Standby LED         : Invalid
>
> Chass Entitlement   : All (0x0)
>
> Ports Entitled      : All
>
> Active Alarms       : NONE
>
>  
>
> [local]Redback#
>
>
> Best regards  
>
> Eng. Nawras Chahbandar 
>
>
>
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp


-- 

Marcin Kuczera / Wiceprezes Zarządu / CTO
+48 32 440 80 71/ marcin.kuczera at leon.pl <mailto:marcin.kuczera at leon.pl>

Leon Sp. z o.o.
ul. Kilińskiego 33d, 44-200 Rybnik
http://www.leon.pl/

INTERNET | TELEWIZJA | TELEFON

KRS 0000223101 Sąd Rejonowy w Gliwicach
Kapitał zakładowy 282.500 zł
NIP: 6332068698

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20160922/9a6a70c4/attachment.html>