[rbak-nsp] xcrp 4 redunancy

[Dmitry]

Will we can connect managment port on second xcrp4 and then first xcrp4  
failed , second  will work automaticaly?


On 21.11.2017 13:39, Marcin Kuczera wrote:
> On 2017-11-21 05:41, Dmitry wrote:
>> Hello!
>>
>> We have two route processor xcrp4, how we can configure redunancy 
>> mode for two installing xcrp4? If it is possible!
>
> It is very well automated in this kind of equipment.
> Once you put second XCRP into chassis, it will detect active XCRP and 
> equalize software version + configs with active XCRP.
> So almost nothing to be done here.
>
> If you used it before with one XCRP only, probably your configuration 
> contains some redundancy alarms seizure commands, so than you will 
> need to remove them to
> get redundancy alarams if they occur.
>
> Marcin
>
>
>>
>> Thank you!
>>
>> _______________________________________________
>> redback-nsp mailing list
>> redback-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/redback-nsp
>
>
> -- 
>
> Marcin Kuczera / Wiceprezes Zarządu / CTO
> +48 32 440 80 71/ marcin.kuczera at leon.pl <mailto:marcin.kuczera at leon.pl>
>
> Leon Sp. z o.o.
> ul. Kilińskiego 33d, 44-200 Rybnik
> http://www.leon.pl/
>
> INTERNET | TELEWIZJA | TELEFON
>
> KRS 0000223101 Sąd Rejonowy w Gliwicach
> Kapitał zakładowy 576.700 zł
> NIP: 6332068698
>
>
>
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20171121/ef65f631/attachment.html>