[rbak-nsp] link group on 4x10G card (SE600/1200) for dot1q purpose

[Marcin Kuczera]

hello,

is there anyone here that uses link group on SE600/1200, software 12.1.1.x ?

- need to check if it should work if link group contains 2 ports from
same card

- need to check if it should work if link group contains 2 ports from
different cards

- above need to do like round-robin or some hashing to distribute
outbound traffic quite equally

- if BFD is possible in such cases ?


- is it normal that in link-group dot1q mode - for every vlan separate
link-group is automatically created ?


Regards,

Marcin