[rbak-nsp] radius connectivity

[Soe Prapti]

Hi marcin,

It is better using linecards for radius connectivity

Thanks
Soe

On Jan 8, 2019 18:31, "Marcin Kuczera" <marcin at leon.pl> wrote:

> hello,
>
> I have a general question related to Radius connectivity.
>
> Our radius communication uses context local, and - the traffic uses O&M
> interface that is  bound to ethernet 8/1.
>
> So Radius messages generated by EPPA go from linecard to XCRP and then -
> out.
>
>
> Do you also do it this way, or you use linecards for Radius connectivity ?
>
>
> I'am asking, because we observe lot of EPPA crashes, I suppose that this
> is related to radius, and this might be a  reason.
> If for example radius message is lost, than EPPA tries to resend it, and
> this might cause a crash in specific conditions (wrong calculation of
> return address by PPA).
>
>
> --
>
> Marcin Kuczera / Wiceprezes Zarządu / CTO
> +48 32 440 80 71/ marcin.kuczera at leon.pl
>
> Leon Sp. z o.o.
> ul. Kilińskiego 33d, 44-200 Rybnik
> http://www.leon.pl/
>
> INTERNET | TELEWIZJA | TELEFON
>
> KRS 0000223101 Sąd Rejonowy w Gliwicach
> Kapitał zakładowy 576.700 zł
> NIP: 6332068698
>
> _______________________________________________
> redback-nsp mailing list
> redback-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/redback-nsp
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/redback-nsp/attachments/20190108/eadb7a89/attachment.html>