[RPKI-Deployers] How many active sessions to RPKI validators?

[Compton, Rich A]

Hello all,
Junos by default will maintain 2 active connections to RPKI validators even if there are more than 2 validator IPs configured.  If there is an issue with a connection to one of the active validators,  Junos will pick one of the other inactive validators to connect to.  Also, it is possible to increase the “max-sessions” variable in the validator group config to something greater than the default of 2 so that the router will maintain active connections to more validators.
My question is, out of these two options, which option do you think is preferable and why?
Thanks!
[signature_1068113572]

Rich Compton    |     Principal Eng     |    314.596.2828
8560 Upland Drive,   Suite B  |  Englewood, CO 80112

E-MAIL CONFIDENTIALITY NOTICE: 
The contents of this e-mail message and any attachments are intended solely for the addressee(s) and may contain confidential and/or legally privileged information. If you are not the intended recipient of this message or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message and any attachments. If you are not the intended recipient, you are notified that any use, dissemination, distribution, copying, or storage of this message or any attachment is strictly prohibited.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/mailman/private/rpki-deployers/attachments/20200728/293c23e9/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 23501 bytes
Desc: image001.png
URL: <https://puck.nether.net/mailman/private/rpki-deployers/attachments/20200728/293c23e9/attachment-0001.png>