[VoiceOps] T38 over Sip

[Alex Balashov]

There are many things that could be wrong there.  Problem description is 
not sufficient.

Junaid Hattia wrote:

> Howdy
> 
> Ok so im trying to t38 over sip working with no luck
> 
> My test lab is as follows:
> 
> Pangea box connecting to a AS5400 via PRI, which then traverses an Acme 
> Session director, broadsoft and then exits via PGW(SS7)
> 
> The sniffer capture says “failure to train”
> 
> 
> Any ideas?
> 
> --
>  junaid
> 
> 
> 
> 
> 
> Please note: This email and its content are subject to the disclaimer as 
> displayed at the following link 
> http://www.is.co.za/legal/E-mail+Confidentiality+Notice+and+Disclaimer.htm. 
> Should you not have Web access, send an email to 
> mailto:disclaimers at is.co.za and a copy will be sent to you.
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops


-- 
Alex Balashov - Principal
Evariste Systems
Web     : http://www.evaristesys.com/
Tel     : (+1) (678) 954-0670
Direct  : (+1) (678) 954-0671