[VoiceOps] T38 over Sip

[Junaid Hattia]

So basically I cannot fax...attached is the wireshark trace


On 2009/08/28 1:29 PM, "Alex Balashov" <abalashov at evaristesys.com> wrote:

> There are many things that could be wrong there.  Problem description is
> not sufficient.
> 
> Junaid Hattia wrote:
> 
>> Howdy
>> 
>> Ok so im trying to t38 over sip working with no luck
>> 
>> My test lab is as follows:
>> 
>> Pangea box connecting to a AS5400 via PRI, which then traverses an Acme
>> Session director, broadsoft and then exits via PGW(SS7)
>> 
>> The sniffer capture says ³failure to train²
>> 
>> 
>> Any ideas?
>> 
>> --
>>  junaid
>> 
>> 
>> 
>> 
>> 
>> Please note: This email and its content are subject to the disclaimer as
>> displayed at the following link
>> http://www.is.co.za/legal/E-mail+Confidentiality+Notice+and+Disclaimer.htm.
>> Should you not have Web access, send an email to
>> mailto:disclaimers at is.co.za and a copy will be sent to you.
>> 
>> 
>> ------------------------------------------------------------------------
>> 
>> _______________________________________________
>> VoiceOps mailing list
>> VoiceOps at voiceops.org
>> https://puck.nether.net/mailman/listinfo/voiceops
> 


Please note: This email and its content are subject to the disclaimer as displayed at the following link http://www.is.co.za/legal/E-mail+Confidentiality+Notice+and+Disclaimer.htm. Should you not have Web access, send a mail to disclaimers at is.co.za and a copy will be emailed to you.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: fax-sniffer-cap.7z
Type: application/octet-stream
Size: 1427151 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/voiceops/attachments/20090828/9500a6cc/attachment-0001.obj>